LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7   Report Post  
Old December 24th 05, 03:16 PM posted to rec.radio.amateur.antenna
Kip W6KIP
 
Posts: n/a
Default Crimp, Clamp or Solder?


Get a Weller SP-120 soldering iron. It's 120 watts. About $46. You can
typically find it by Googling.

A ~200W soldering gun from Radio Shack or Home Depot will also work fine.

Tam/WB2TT


I'm a cheapskate who uses a soldering gun about as often as I make new
coax lines. (It happens, but I don't spend much time at it.) If you
have a Harbor Freight tool store near you, they have a 180 watt gun you
can usually catch on sale for 6.99. Not as good as a Weller, I'm sure
but so far the solder hasn't noticed.

73
Kip W6KIP

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
solder paste for SMT? TRABEM Homebrew 3 October 3rd 05 06:02 PM
Warning -- bad new type of solder flux Mike Knudsen Boatanchors 20 March 31st 04 10:46 PM
CHEAP SONY 2010 REPAIR Smokey Shortwave 23 March 28th 04 03:48 PM
sn96.3 ag3.7 solder qstn BOEING377 Boatanchors 12 February 17th 04 05:04 AM
Who makes the best solder braid? Richard Homebrew 50 January 5th 04 06:39 AM


All times are GMT +1. The time now is 02:41 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017