| Home |
| Search |
| Today's Posts |
|
#29
December 25th 05, 03:37 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Crimp, Clamp or Solder?
Make that Scotch #33+ pelase....
Bill Turner wrote: ORIGINAL MESSAGE: On Sun, 25 Dec 2005 01:19:59 -0500, "Hal Rosser" wrote: I vote all 3 crimp it clamp it and solder it. make a good mechanical connection - then solder it. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Don't forget to add Loctite, spot weld, drop forge, nuclear laser, explosive forming, refractory conditioning, epoxy, RTV, sixteen layers of Scotch #33 tape and the Pope's blessing. Those who are non-Catholics have a problem. :-) 73, Bill W6WRT |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| solder paste for SMT? | Homebrew | |||
| Warning -- bad new type of solder flux | Boatanchors | |||
| CHEAP SONY 2010 REPAIR | Shortwave | |||
| sn96.3 ag3.7 solder qstn | Boatanchors | |||
| Who makes the best solder braid? | Homebrew | |||
Threaded Mode
