measurement error or bad coax??

December 27th 05, 03:31 AM posted to rec.radio.amateur.antenna

Hal Rosser

Posts: n/a

measurement error or bad coax??

"dansawyeror" wrote in message
. ..
I have a section of air core Beldin coax, with the center feed separated
by a
single wind of plastic insulator. The section is about 65 meters long. I
added
enough RG58 to the feed end to get a full wave length. I then measured the
impedance using aa Autek analyzer. It read 30 Ohms.

I don't get it.

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FCC: Broadband Power Line Systems	Paul	Policy	0	January 10th 05 05:41 PM
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF}	RHF	Antenna	27	November 3rd 04 01:38 PM
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF}	RHF	Shortwave	23	November 3rd 04 01:38 PM
Poor quality low + High TV channels? How much dB in Preamp?	lbbs	Antenna	16	December 13th 03 03:01 PM
Poor quality low + High TV channels? How much dB in Preamp?	lbbs	Shortwave	16	December 13th 03 03:01 PM

All times are GMT +1. The time now is 05:06 AM.

Menu

About Us