| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
Ted wrote:
I have about 40 feet of garden to erect an antenna....Could anyone tell me if I took 2 20 feet length of twin ladder and shorted the ends fed one side of the dipole with twin ladder and connected a 52 ohm resistor across the other side ... Where is the ground for that 52 ohm resistor? -- 73, Cecil, http://www.qsl.net/w5dxp |
|
#2
|
|||
|
|||
|
Where is the ground for that 52 ohm resistor?
-- 73, Cecil ========================================= Really Cecil, you shouldn't ask awkward questions like that. You might gain the reputation of being a wicked troller. On the other hand, it cannot be denied, your question is apt and could be considered to be educational. Please continue! Due to a certain person who ought to know better, I suffer from the same misinterpretation of motives myself. smiley ---- Reg. |
|
#3
|
|||
|
|||
|
Cecil Moore wrote:
Ted wrote: I have about 40 feet of garden to erect an antenna....Could anyone tell me if I took 2 20 feet length of twin ladder and shorted the ends fed one side of the dipole with twin ladder and connected a 52 ohm resistor across the other side ... Where is the ground for that 52 ohm resistor? The feed goes to the centre..The ends are strapped together and the resistor connects between the free ends opposite the feed connection... -- Regards Ted Wager Using Debian Linux |
|
#4
|
|||
|
|||
|
Ted wrote:
Cecil Moore wrote: Ted wrote: I have about 40 feet of garden to erect an antenna....Could anyone tell me if I took 2 20 feet length of twin ladder and shorted the ends fed one side of the dipole with twin ladder and connected a 52 ohm resistor across the other side ... Where is the ground for that 52 ohm resistor? The feed goes to the centre..The ends are strapped together and the resistor connects between the free ends opposite the feed connection... I'm afraid we need a schematic. Is this correct? 20ft 20ft +-------------------FP------------------+ | 52 ohm resistor +-------------------FP------------------+ -- 73, Cecil, http://www.qsl.net/w5dxp |
|
#5
|
|||
|
|||
|
Cecil Moore wrote:
Ted wrote: Cecil Moore wrote: Ted wrote: I have about 40 feet of garden to erect an antenna....Could anyone tell me if I took 2 20 feet length of twin ladder and shorted the ends fed one side of the dipole with twin ladder and connected a 52 ohm resistor across the other side ... Where is the ground for that 52 ohm resistor? The feed goes to the centre..The ends are strapped together and the resistor connects between the free ends opposite the feed connection... I'm afraid we need a schematic. Is this correct? 20ft 20ft +-------------------resistor------------+ | connected connected +-------------------FP------------------+ Like so...Ends strapped and r at centre opposite feed... -- Regards Ted Wager Using Debian Linux |
|
#6
|
|||
|
|||
|
Ted wrote:
I'm afraid we need a schematic. Is this correct? 20ft 20ft +-------------------resistor------------+ | connected connected +-------------------FP------------------+ OK, close to a T2FD. Here are the formulas for such an antenna. http://www.hard-core-dx.com/nordicdx.../t2design.html Looks like yours would be resonant around 8.2 MHz. -- 73, Cecil, http://www.qsl.net/w5dxp |
|
#7
|
|||
|
|||
|
Cecil Moore wrote:
Ted wrote: I'm afraid we need a schematic. Is this correct? 20ft 20ft +-------------------resistor------------+ | connected connected +-------------------FP------------------+ OK, close to a T2FD. Here are the formulas for such an antenna. http://www.hard-core-dx.com/nordicdx.../t2design.html Looks like yours would be resonant around 8.2 MHz. Thanks very much for the info and the address.. -- Regards Ted Wager Using Debian Linux |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Crystal Set Query | Shortwave | |||
| Query IC-2350 | Swap | |||
| Panasonic Query | Shortwave | |||
| LU1ZA QSL Query | Dx | |||
| LU1ZA QSL Query | Dx | |||