Menu

Current through coils

Search this Thread

Prev

Previous Post

Next Post

Next

#11

Report Post

Old

March 17th 06, 02:41 AM posted to rec.radio.amateur.antenna

Cecil Moore

Posts: n/a

Default

Current through coils

wrote:
I'm suprised you wouldn't want to learn more about measurements.

I'm surprised you wouldn't want to share your engineering
knowledge, e.g. is it really possible to use a phaseless
signal to measure phase shift? If so, please enlighten us.
I can't figure out how to do it. Since you apparently have
figured it out, please share your knowledge with us.

I don't see anything Roy said that disagrees with what I measured, so
that's a non-issue.

Roy and I have previously agreed with your measurements. It's
your conclusions about those measurements that he apparently
doesn't seem to understand and neither do I. I'm certainly not
speaking for Roy, but when he points out to you that my
measurements agree with EZNEC, one wonders what that means
in reality.

I take it you don't want to discuss how to make better measurements?

I take it you don't want to share you knowledge of how to
measure phase using a phaseless signal? Such a feat is
extremely more important than any measurement discussion.

Please just explain from a technical standpoint how a
signal without phase can be used to measure a phase
shift through a coil. That's an extremely simple request
and would be extremely useful to the entire group.

While you are at it, please explain the EZNEC results
in the middle graphic at: http://www.qsl.net/w5dxp/3freq.gif.
the request for which you seem to have forgotten about.
--
73, Cecil http://www.qsl.net/w5dxp

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Current in Loading Coils	Cecil Moore	Antenna	2	March 5th 06 08:26 PM
FCC: Broadband Power Line Systems	Paul	Policy	0	January 10th 05 05:41 PM
FS: sma-to-bnc custom fit rubber covered antenna adapter	Stephen G. Gulyas	Scanner	17	December 7th 04 06:42 PM
Current in antenna loading coils controversy (sigh)	Roy Lewallen	Antenna	25	January 15th 04 09:11 PM
Current in antenna loading coils controversy	Yuri Blanarovich	Antenna	454	December 12th 03 03:39 PM

All times are GMT +1. The time now is 03:46 PM.

About Us

"It's about Radio"

Contact Us RadioBanter forum home Privacy Statement

Copyright © 2017