Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Ian, GM3SEK wrote:
'There are several methods of finding current distribution." "I may be a fool, but I`n not the fool to be pitied because I disagreed with Terman. On page 893 of the 1955 edition of "Electronic and Radio Engineering" Terman writes: "An antenna can therefore be regarded as a resonant system with distributed constants. As a result, the impedance of an antenna behaves in much the same manner as does the impedance of a transmission line (see Sec. 4-7)." This is not news to many thread participants. Fig. 4-7 on page 96 shows an open-circuited transmission line. At the open circuit there is maximum voltage and zero current. Except for radiation and loss to heat, the typical standing-wave antenna would behave much the same as this ideal transmission line. Not only does Terman give voltage and current diagrams, he gives a phase diagram. It shows that whenever the voltage or current crosses the zero axis (changes sign) the phase angle changes abruptly by 180-degrees. Phase is unchanging between these inflection points. This agrees with what Cecil has said all along in this discussion. Best regards, Richard Harrison, KB5WZI |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Current in Loading Coils | Antenna | |||
FCC: Broadband Power Line Systems | Policy | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Scanner | |||
Current in antenna loading coils controversy (*sigh*) | Antenna | |||
Current in antenna loading coils controversy | Antenna |