"switcher" wrote in message
...
On the picture, you'll see 7 connections for the cables, oe at the
bottom (7), 6 at the top of the C. How do I need to connect the cables
to have the maximum out of my AM/SW loop antenna ??

http://users.fulladsl.be/spb13810/amloop/tunablec.jpg


I would like to know what I can do with screws A, B, C and D, and of
course, where to connect the cable ends ...



I am making one loop with these tools:
these are the picts:
http://users.fulladsl.be/spb13810/amloop/loop83cm.jpg

the loop, diameter = 83 cm.

http://users.fulladsl.be/spb13810/amloop/loopbottom.jpg
The bottom, a plastic case 11 x 18 cm.

http://users.fulladsl.be/spb13810/am...oopbottom2.jpg
The plastic screws that fit the hulahoop.

I will mount the C inside the box, so I'll have no cables outside ...


Thanks,
Marc

--
een appeltje te schillen met http://applefaulty.be
http://users.fulladsl.be/spb13810/bwnl.htm
Breng je iMac G5 terug (ik wil binnen 2 jaar geen defecte 2de hands Apple
kopen)
http://www.apple.com/nl/support/imac...ensionprogram/

Are you going to run QRP? I made mind out of 1/2 copper tubing and
made loop from coax at the top the tuning capacitor I used was from
ebay the spacing between the tuner is 1/4 inch my tuner is 4" wide
6"long and about 3 1/2 high first contact 22" off ground was Detroit
Michigan I'm in Dunedin Florida second contact was Canada for about
a half hour. with a small tunable cap you will have arking I am
running 100 watts. Jim De W8OLD
--
----------------------------------------------
Posted with NewsLeecher v3.0 Final
* Binary Usenet Leeching Made Easy
* http://www.newsleecher.com/?usenet
----------------------------------------------

Try this site www.kr1st.com.magloop.htm
this one I built and am running 100 watts. 73's de Jim W8OLD
--
----------------------------------------------
Posted with NewsLeecher v3.0 Final
* Binary Usenet Leeching Made Easy
* http://www.newsleecher.com/?usenet
----------------------------------------------

That link doesn't

"JT" wrote in message
news
Try this site www.kr1st.com.magloop.htm
this one I built and am running 100 watts. 73's de Jim W8OLD
--
----------------------------------------------
Posted with NewsLeecher v3.0 Final
* Binary Usenet Leeching Made Easy
* http://www.newsleecher.com/?usenet
----------------------------------------------

" wrote:

Try this site www.kr1st.com.magloop.htm
this one I built and am running 100 watts. 73's de Jim W8OLD
--
----------------------------------------------
Posted with NewsLeecher v3.0 Final
* Binary Usenet Leeching Made Easy
* http://www.newsleecher.com/?usenet
----------------------------------------------

The link should read http://www.kr1st.com/magloop.htm

Irv VE6BP
--
--------------------------------------
Diagnosed Type II Diabetes March 5 2001
Beating it with diet and exercise!
297/215/210 (to be revised lower)
58"/43"(!)/44" (already lower too!)
--------------------------------------
Visit my HomePage at http://members.shaw.ca/finkirv/index.html
Visit my Baby Sofia website at http://members.shaw.ca/finkirv4/index.htm
Visit my OLDTIMERS website at http://members.shaw.ca/finkirv5/index.htm
--------------------
Irv Finkleman,
Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP
Calgary, Alberta, Canada