LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old May 1st 06, 04:24 AM posted to rec.radio.amateur.antenna
 
Posts: n/a
Default Wire diameter vs Impedance

From page 22.2 of the 2005 ARRL Handbook

"CONDUCTOR SIZE"

"The impedance of the antenna also depends on the diameter of the
conductor in relation to the wavelength. If the diameter of the
conductor is increased, the capacitance per unit length increases and
the inductance per unit length decreases. Since the radiation
resistance is affected relatively little, the decreased L/C ratio
causes the Q of the antenna to decrease so that the resonance curve
becomes less sharp with change in frequency. This effect is greater as
the diameter is increased, and is a property of some importance at the
very high frequencies where the wavelength is small."

Lots of interesting graphs and charts in the ARRL Antenna Handbook as
well.

Roger

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Single Wire Antenna {Longwire / Random Wire Antenna} - What To Use : Antenna Tuner? and/or Pre-Selector? David Shortwave 0 December 28th 05 05:24 AM
Sony ICF-SW7600GR antenna jack acmac Shortwave 15 October 26th 05 01:53 AM
Building a Matching Transformer for Shortwave Listener's Antenna using a Binocular Ferrite Core from a TV type Matching Transformer RHF Shortwave 13 November 3rd 04 08:34 PM
Balun JJ Shortwave 43 August 7th 03 07:21 PM
Feedpoint impedence / wire diameter Tom Bruhns Antenna 0 July 10th 03 08:23 PM


All times are GMT +1. The time now is 04:15 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017