Cecil Moore wrote:
Gene Fuller wrote:

I do not disagree with anything you have said.


Please answer this question. Does the amplitude of the
standing wave current contain any phase information?

You have previously asserted that it does. Roy says
it doesn't. Time to chose between technical fact
and agreeing with your friend (who is technically
incorrect).

Cecil,

You win!

You have now set the new world record in misquoting. You might want to
give a call to the fine folks at Guinness.

73,
Gene
W4SZ

Gene Fuller wrote:

Cecil Moore wrote:
Please answer this question. Does the amplitude of the
standing wave current contain any phase information?

You have previously asserted that it does. Roy says
it doesn't. Time to chose between technical fact
and agreeing with your friend (who is technically
incorrect).

Cecil, You win!
You have now set the new world record in misquoting. You might want to
give a call to the fine folks at Guinness.

It was a simple yes/no question, Gene. That you refuse to
answer speaks volumes so I will ask it once again, copying
from a previous posting that you ignored.

Just insert an 'X' for the one you agree with. If you don't
respond, I will add this to a long list of questions that
I have asked that the "experts" are afraid to answer.

_____ Standing wave current magnitude contains some phase
information.

_____ Standing wave current magnitude contains zero phase
information.
--
73, Cecil http://www.qsl.net/w5dxp

Cecil Moore wrote:

Gene Fuller wrote:

Cecil Moore wrote:

Please answer this question. Does the amplitude of the
standing wave current contain any phase information?

You have previously asserted that it does. Roy says
it doesn't. Time to chose between technical fact
and agreeing with your friend (who is technically
incorrect).


Cecil, You win!
You have now set the new world record in misquoting. You might want to
give a call to the fine folks at Guinness.


It was a simple yes/no question, Gene. That you refuse to
answer speaks volumes so I will ask it once again, copying
from a previous posting that you ignored.

Just insert an 'X' for the one you agree with. If you don't
respond, I will add this to a long list of questions that
I have asked that the "experts" are afraid to answer.

_____ Standing wave current magnitude contains some phase
information.

_____ Standing wave current magnitude contains zero phase
information.

If a magnitude can, by itself, contain phase information, why
do we have to specify the angle in a phasor?
73,
Tom Donaly, KA6RUH

On Mon, 15 May 2006 17:12:58 GMT, "Tom Donaly"
wrote:

_____ Standing wave current magnitude contains some phase
information.

_____ Standing wave current magnitude contains zero phase
information.

If a magnitude can, by itself, contain phase information, why
do we have to specify the angle in a phasor?


Hi Tom,

Cecil probably doesn't understand that both options give both current
magnitude AND phase as choices. Rather makes the "question"
pointless, but nothing new in the correspondence from our Xerox
philosopher.

For the record:

____X____ Standing wave current magnitude contains NO phase
information.

73's
Richard Clark, KB7QHC

Richard Clark wrote:
For the record:

____X____ Standing wave current magnitude contains NO phase
information.

Remember the context is the 1/2WL thin-wire dipole fed
by 1 amp at 0 degrees on page 464 in Kraus' "Antennas
For All Applications", 3rd Edition where the standing wave
current magnitude EQUALS cos(X) where X is the number of
degrees away from the feedpoint. The arc-cosine of the standing
wave current magnitude *IS* the phase.

One other point. At least one expert has said that nothing
is lost in the superposition process. We know that the
forward traveling wave has phase and the reverse traveling
wave has phase. If the superposed standing wave current
magnitude contains no phase information, then something was
lost in the superposition process because the standing wave
current phase certainly contains no phase information as
illustrated at:

http://www.qsl.net/w5dxp/travstnd.GIF
--
73, Cecil http://www.qsl.net/w5dxp

On Mon, 15 May 2006 18:18:43 GMT, Cecil Moore
wrote:

Richard Clark wrote:
For the record:

____X____ Standing wave current magnitude contains NO phase
information.

Remember the context is the 1/2WL thin-wire dipole fed

Context schmomtext, Nothing said is nothing said.

This is the problem that comes of a Xerox education.

Richard Clark wrote:
On Mon, 15 May 2006 18:18:43 GMT, Cecil Moore
wrote:


Richard Clark wrote:

For the record:

____X____ Standing wave current magnitude contains NO phase
information.

Remember the context is the 1/2WL thin-wire dipole fed


Context schmomtext, Nothing said is nothing said.

This is the problem that comes of a Xerox education.

Hi Richard,
all Cecil's information is in the schmomtext.
73,
Tom Donaly, KA6RUH

Based on my reading, it appears that Kraus did not say anything closely
resembling Cecil's comments. Cecil is "interpreting" a very simple
picture in Kraus. All of the math appears to arise from Cecil's
imagination.

Cecil is so good at quoting that he should have no problem with
providing the exact unedited words from Kraus that support the
arc-cosine analysis.


73,
Gene
W4SZ

Gene Fuller wrote:
Cecil is so good at quoting that he should have no problem with
providing the exact unedited words from Kraus that support the
arc-cosine analysis.

"It is generally assumed that the current distribution of an
infinitesimally thin antenna is sinusoidal, ..."

Simply look at Kraus' graph in Figure 14-2. A sinusoid with
current amplitude equal to 1.0 at the center and current
amplitude equal to zero at the end is obviously a cosine
wave. Since the magnitude varies from 1.0 at the center to
zero at the end, taking the arc-cosine of the magnitude
yields the distance from the center in degrees.
--
73, Cecil http://www.qsl.net/w5dxp

Tom Donaly wrote:
If a magnitude can, by itself, contain phase information, why
do we have to specify the angle in a phasor?

The subject is the standing wave current phasor on a
1/2WL thin-wire dipole, not phasors in general.

The point is that we do *NOT* have to specify the angle
for the standing wave current phasor on a 1/2WL thin-wire
dipole. The standing wave current phase angle at any point
up and down the antenna is already known to be EXACTLY the
same as the angle of the source current at any particular
time. That's why W7EL's phase measurements were meaningless
and his conclusions false. Note he has refused to discuss
the subject with me here or over private email.

If the source current is 1 amp at 0 degrees, the standing
wave current magnitude equals cos(X) and the standing wave
current phase equals zero degrees. That you guys disagree
indicates ignorance of the assertions of Kraus, Balanis,
and others.

This is what the argument is all about. The phase angle
for the standing wave current is known to be zero degrees
and unchanging with respect to the source current phasor.
The standing wave magnitude is known to be the cosine of
the number of degrees away from the feedpoint. That same
number of degrees is the absolute value of the phase angle
of the forward current and reflected current phasors.

The magnitude of the standing wave current on a 1/2WL
thin-wire dipole, fed with 1 amp at 0 degrees as
illustrated by Kraus, indeed does contain all the phase
information that anyone could ever need or want.
--
73, Cecil http://www.qsl.net/w5dxp