100 Ohm Twin Lead - RadioBanter

#24

May 16th 06, 04:30 PM posted to rec.radio.amateur.antenna

Cecil Moore

Posts: n/a

100 Ohm Twin Lead

Buck wrote:

Cecil Moore wrote:

Buck wrote:
Ok, I learned something, but I would be inclined to go with the 1/2
wave of 75 ohm and then the 50 ohm

"1/2 wave of 75 ohm" would make matters worse for a 25 ohm
antenna since the SWR would be higher than for 50 ohms.
What you need is 1/4WL of 35 ohm coax like RG83.

OOPS, I went back to the original problem with 100 ohm

Then you should use 1/4 wave of 75 ohm, not 1/2 wave.
--
73, Cecil http://www.qsl.net/w5dxp

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using Twin Lead or Ladder Line for your Antenna's Feed-in-Line ? - Then 'consider' a Pair of Vintage Style TV Antenna Clips . . .	RHF	Shortwave	11	December 29th 05 05:05 AM
ABOUT - The "T" & Windom Antenna plus Twin Lead Folded Dipole Antenna	RHF	Shortwave	0	November 4th 05 07:13 PM
ABOUT - Making a SWL Antenna out of 300 Ohm Twin Lead and TV Coax Cable	RHF	Shortwave	0	October 28th 05 01:22 PM
using 450 ohm twin lead to feed 43 ft multiband groundmounted vertical	Denton	Antenna	0	October 3rd 05 02:08 AM
Ground plane vertical fed with twin lead?	denton	Antenna	4	April 6th 05 06:58 PM

All times are GMT +1. The time now is 12:18 AM.

Menu

About Us