| Home |
| Search |
| Today's Posts |
|
|
|
#1
May 21st 06, 02:41 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Auto-Tuners with balanced antenna?
Ed wrote:
Any recommendations for an automatic tuner that will work well with balanced antennas fed with 600 ohm ladder line? Specifically, I have in mind a 160M dipole fed with ladder line. Ed K7AAT I use the LDG z100 with and external Balun Works well for me. 73 Dave kc1di |
|
#2
May 21st 06, 03:01 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
|
Auto-Tuners with balanced antenna?
I run a SGC ATU to my Dipole with ladder line with no problems
Lew "KC1DI" wrote in message ... Ed wrote: Any recommendations for an automatic tuner that will work well with balanced antennas fed with 600 ohm ladder line? Specifically, I have in mind a 160M dipole fed with ladder line. Ed K7AAT I use the LDG z100 with and external Balun Works well for me. 73 Dave kc1di |
|
#3
May 21st 06, 04:08 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
|
Auto-Tuners with balanced antenna?
Lew wrote:
I run a SGC ATU to my Dipole with ladder line with no problems Isn't that contrary to SGC's recommendations? -- 73, Cecil http://www.qsl.net/w5dxp |
|
#4
May 21st 06, 08:07 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
|
Auto-Tuners with balanced antenna?
In article ,
Cecil Moore wrote: Lew wrote: I run a SGC ATU to my Dipole with ladder line with no problems Isn't that contrary to SGC's recommendations? Only if you believe that SGC, has a CLUE about how their autotuner works, and the design of the firmware that runs it............. Me |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
