Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
Cecil Moore wrote:
Bob Miller wrote: I have a low, 30 feet or so, 80 meter dipole fed with ladderline, through an mfj 989c tuner. Hot humid clime (Texas). Is the ground wire on the back of the tuner, going to a ground rod, enough to bleed off electrical build up? If there is a DC path to ground from *BOTH* sides of the dipole, the answer is yes. But, looking at the 989c schematic, I don't see a DC path to ground from one of the balanced line outputs. I forgot to say that your high humidity probably provides a path to ground from the other tuner terminal. It was only during super low humidity conditions in the Arizona desert that I experienced the arcing process during high winds. -- 73, Cecil http://www.qsl.net/w5dxp |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Transfer Impedance(LONG) | Shortwave | |||
ECM Noise on CB | Equipment | |||
'Crackling' Noise on HF Band | Shortwave | |||
RACAL RA-17C12 with DSP / digital readout | Shortwave | |||
Automatic RF noise cancellation and audio noise measurement | Antenna |