LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old June 28th 06, 10:02 PM posted to rec.radio.amateur.antenna
chuck
 
Posts: n/a
Default Noise level between two ant types

chuck wrote:


If the corona starting voltage is typically 30 kV/cm radius, then a tiny
wire could ionize the air at only 300volts or so for a 0.01 cm radius.

http://home.earthlink.net/~jimlux/hv/corona.htm
Corona


As an update, I see that Llewellyn (not
W7EL) in 1975 established experimentally
that for a point radius of 0.01 cm, a
corona will be formed with fields of
only 100 V/m. These results differ a bit
from what would be predicted by
Paschen's curve.

73,
Chuck

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Transfer Impedance(LONG) [email protected] Shortwave 8 March 15th 06 01:25 AM
ECM Noise on CB Zombie Equipment 6 June 4th 05 06:48 PM
'Crackling' Noise on HF Band RadioGuy Shortwave 7 April 20th 05 01:04 AM
RACAL RA-17C12 with DSP / digital readout Lucky Shortwave 9 March 15th 05 06:24 AM
Automatic RF noise cancellation and audio noise measurement JGBOYLES Antenna 25 August 11th 03 01:07 AM


All times are GMT +1. The time now is 04:20 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017