LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2   Report Post  
Old June 14th 06, 10:15 AM posted to rec.radio.amateur.antenna
 
Posts: n/a
Default antenna coil forms


rckchp wrote:

I'm offering these free, first come first served, but you pay the
postage, or you can pick them up if you're local. I think they can be
sent parcel post without any wrapping....I'll just stick a mailing
label on them and send them out. When it arrives just look at the
postage sticker and reimburse me that amount. Any takers? If so, email
me (off list) your name & mailing address.

72 & Regards,

Rich k2cpe
K2 #1102


Tempting, but I'm in pretty good shape here I guess. Also, I'm
kinda wary of any paper material, as it might get damp, etc..
I'm always looking for things to build antennas, coils, etc...
I just stumbled across another recently... I've been thinking
about making a "plastic bugcatcher" for 160m. I already
have two 80-10 versions.. But I always was wondering what
to form a bigger coil on...Well, I think I found one way...
Use these big canisters that DVD's come in... I torch up a lot
of DVD's, and buy a lot of them. Both 50 packs, and 100
packs, that come in the big plastic canisters. I was looking
at one the other day, and thought, *dang*, this would make
a pretty good coil form... They are 5 inches dia, and about
6 inches tall, if you used a 100 pack.. They already have a
spindle running through the middle as an alignment guide..
Some thin sticks might fit as is, but most would need to have
that widened out a bit.. Would be a cinch to rig up..
So I think I'm going to use one of those to wind a 160 coil.
yep, it will be heavy with the wire, and the antenna would have
to be guyed when driving I think. But I could use as is sitting still.
Those canisters could be stacked for more height.
The coil on my 80-10 antenna is 3 inch dia plastic tube, and
the top and bottom caps were peanut butter jar lids. They fit
perfectly. I drilled holes in the caps, and ran the stick up
through the middle, and then glued and sealed it.
MK

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Bose Wave Radio - What's Your Opinion ? David Shortwave 16 June 12th 06 07:48 AM
Part # 2 - The Simplest Shortwave Listener (SWL) Antennas That I Know Of . . . RHF Shortwave 0 June 2nd 06 10:57 AM
No CounterPoise - Portable Antenna System RHF Shortwave 1 November 19th 05 06:18 PM
Question is 'it' a Longwire {Random Wire} Antenna -or- Inverted "L" Antenna ? RHF Shortwave 5 November 6th 05 04:52 AM


All times are GMT +1. The time now is 09:50 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017