| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
Ben Jackson wrote:
I would like to pre-calculate an approximate match to Z=50ohms which I can put directly at the feed point and shrink-wrap with the balun. Is there a way to do that, or is it too touchy to do without measuring the actual antenna? If you were within 20%, you would be lucky. Best to fine tune it before shrink-wrapping it. -- 73, Cecil http://www.qsl.net/w5dxp |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| dipole and balun question | Antenna | |||
| Workman BS-1 Dipole Antenna = Easy Mod to make it a Mini-Windom Antenna ! | Shortwave | |||
| How to measure soil constants at HF | Antenna | |||
| Imax ground plane question | CB | |||
| From the Extra question pool: The dipole | Policy | |||