Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
Ben Jackson wrote:
I would like to pre-calculate an approximate match to Z=50ohms which I can put directly at the feed point and shrink-wrap with the balun. Is there a way to do that, or is it too touchy to do without measuring the actual antenna? If you were within 20%, you would be lucky. Best to fine tune it before shrink-wrapping it. -- 73, Cecil http://www.qsl.net/w5dxp |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
dipole and balun question | Antenna | |||
Workman BS-1 Dipole Antenna = Easy Mod to make it a Mini-Windom Antenna ! | Shortwave | |||
How to measure soil constants at HF | Antenna | |||
Imax ground plane question | CB | |||
From the Extra question pool: The dipole | Policy |