jawod wrote:
test wrote:
jawod wrote:

I am considering building the Louisiana loop shown in this month's
QST. It is basically an inverted delta loop. I don't know if I can
model it on EZNEC (I guess I can...but I've only progressed through a
dipole or two).

I actually intend to string it up among some trees in the backyard in
a sort of temporary fashion.

Realizing the directionality involved, I will aim it toward Asia over
Alaska.

Now, any caveats or recommendations or ? before I embark on my first
antenna build?

I don't at present even know the feedpoint impedance but I intend to
use RG8U for feedline if that's possible. There is no mention of an
UNUN or Balun in the article.

What do youse think? Thinks?

John
AB8WH

PS, I'll give the hoberman sphere a rest for a while (hi)

This antenna was meant to be fed as a multiband antenna using open
wire feedline and a tuner.

Its height dependent. The takeoff angle on 20 is high. I myself would
use a dipole with open wire feedline. However the authors intentions
was for a compact multiband antenna. If you have trees use the large
loop as in the ARRL antenna handbook.

For a better antenna that feeds with open wire line and that has a
ideal low angle pattern on all band from 20 meters to 10. Look at the
horizontal magnetic slot antenna. You can find details in the latest
RSGB handbook.

A good tuner for these antennas is the Balanced Tuner by Measures.


Pat
Pat,
Thanks for the input.
I have a question.

Why do you say that the antenna was meant to be fed using open wire
feedline?

In the article, it shows an SO239 bulkhead to be attached to RG8U cable.

John
AB8WH
I Hope we talking about the same antenna?

I am talking about the antenna in this months QST page 38 ZS6AAA

"The Compact Quad Multiband Hf Antenna" August 2006

So i hope i have not crossed wires here. But this antenna is open wire
fed, supported on a single fibreglass pole.


Pat