| Home |
| Search |
| Today's Posts |
|
|
|
#1
January 1st 04, 01:31 AM
|
|||
|
|||
"Greg Doughty" wrote in message
... I have a htx 10 and have limited funds. I bought a lil wil and tried to do swr but could not get lower than 1.7:1. I think I have cut the antenna too short. Can I replace it with the same diameter stainless steel piece from a hardware store and cut it to 36" I have left something out. After trying to adjust a little lower in swr, my meter just kept reading 3.0. That is why I think I cut it too short. I should have left it at 1.7! Thanks 73 Greg Hi Greg, I too run a HTX-10 in my car. I use a Wilson 5000 mag-mount on the roof of the car. A tad beefier, but the principle is the same. Replacement whips can be had for about nine bucks. Hope that helps. 73 es HNY de WA2SI |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
