LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5   Report Post  
Old October 7th 06, 03:07 AM posted to rec.radio.amateur.boatanchors
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 123
Default SP-600 Rebuilding Experiences

Well, let's see... I've done four of them, to date. Maybe I've been
lucky or something, but I haven't had too much of a problem aligning the
dials. Perhaps my spec is not tight enough? At any rate, two of the
four had tubular, vice disc, capacitors that had to be changed out. The
worst problem, but doable, are those on each of the L/C elements in the
turret and those under the RF box. Replacing the caps on the L/C
elements for the LO may be of great help in dial alignment.



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thomas & Betts UV Resistant Tie Wraps: Any Experiences With For Out Of Door Usage ? Robert11 Antenna 8 April 18th 06 10:19 PM
Thomas & Betts UV Resistant Tie Wraps: Any Experiences With For Out Of Door Usage ? Robert11 Shortwave 8 April 18th 06 05:27 PM
Thomas & Betts UV Resistant Tie Wraps: Any Experiences With For Out Of Door Usage ? Robert11 Scanner 1 April 14th 06 05:53 AM
Experiences with the Yaesu FT-817 Buther Boy Equipment 1 September 30th 05 07:31 PM
Ice storm - rebuilding antenna farm - advice needed! Ken Bessler Antenna 1 January 9th 05 11:56 PM


All times are GMT +1. The time now is 06:08 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017