| Home |
| Search |
| Today's Posts |
|
#1
October 15th 06, 03:40 PM
posted to rec.radio.amateur.boatanchors
|
|||
|
|||
Kenwood TS-520 problem
On my Kenwood TS-520 when I set the meter to the IP position, the mode
switch to Tune, I do not get any plate reading. The only way I can get the radio working is go to the CW mode and adjust the plate and load controls for max rf. Are the tubes going soft or do I have other problems? -- John Gerstner - KI4LRP East Central Florida Scanner Page http://home.cfl.rr.com/scanner/ |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Vintage Kenwood HF/VHF/UHF Station Blowout..... | Swap | |||
| FS: Kenwood TH-D7A(G) Dual Band Ham Radio HT TS-2000 Sky Command | Swap | |||
| Kenwood TM-732A Display Problem | Equipment | |||
| FS: Kenwood Mikes and Transceive Cable for Twins | Boatanchors | |||
| Kenwood TS570 support ? | Equipment | |||
Threaded Mode
