Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Hawking: An unsolicited endorsement for Speaker Re-coning
All,
I had to have the 4" speaker from my Pilot T502-U re-coned because the voice coil was shot. It's a sentimental set, I have spent a bit keeping it up to par and this was a setback. I used the Circuit Shop in Kentwood, MI. after reading about them here. They charged $35 for the re-coning (Professional!) and $7.50 for excellent packing and quick shipping. WOW!!! what a great job!!! Installed the speaker and it is perfect!! As you can see, I recommend them with all confidence. They are at: www.circuitshop.com Hawking of services completed rgds, Mark S. |
#2
|
|||
|
|||
Hawking: An unsolicited endorsement for Speaker Re-coning
Absolutely. I've had them recone two speakers for me so far, and both were
amazingly perfect. And very reasonably priced. I hope Jim and Richie are teaching their craft to some of the younger guys and they stay in business a long, long, time. Hawking is well deserved. Jeff wrote in message ... All, I had to have the 4" speaker from my Pilot T502-U re-coned because the voice coil was shot. It's a sentimental set, I have spent a bit keeping it up to par and this was a setback. I used the Circuit Shop in Kentwood, MI. after reading about them here. They charged $35 for the re-coning (Professional!) and $7.50 for excellent packing and quick shipping. WOW!!! what a great job!!! Installed the speaker and it is perfect!! As you can see, I recommend them with all confidence. They are at: www.circuitshop.com Hawking of services completed rgds, Mark S. |
#3
|
|||
|
|||
Hawking: An unsolicited endorsement for Speaker Re-coning
Thanks for sharing your positive experience. It is most certainly NOT
hawking on your part. |
#4
|
|||
|
|||
Hawking: An unsolicited endorsement for Speaker Re-coning
wrote in message ... They are at: www.circuitshop.com Thanks. Ooooo, love the Springer, Lucy ! "The Real Boss"- that alone recommends them utterly! John H. |
#5
|
|||
|
|||
Hawking: An unsolicited endorsement for Speaker Re-coning
On Mar 26, 7:53 pm, "Unrevealed Source"
wrote: Absolutely. I've had them recone two speakers for me so far, and both were amazingly perfect. And very reasonably priced. I hope Jim and Richie are teaching their craft to some of the younger guys and they stay in business a long, long, time. Hawking is well deserved. Jeff wrote in message ... All, I had to have the 4" speaker from my Pilot T502-U re-coned because the voice coil was shot. It's a sentimental set, I have spent a bit keeping it up to par and this was a setback. I used the Circuit Shop in Kentwood, MI. after reading about them here. They charged $35 for the re-coning (Professional!) and $7.50 for excellent packing and quick shipping. WOW!!! what a great job!!! Installed the speaker and it is perfect!! As you can see, I recommend them with all confidence. They are at: www.circuitshop.com Hawking of services completed rgds, Mark S. I think the dog does the re-coning. |
#6
|
|||
|
|||
Hawking: An unsolicited endorsement for Speaker Re-coning
Hi Gang,
If'n ya want those guys to do your speaker reconing, better get with the program, 'cause when fishin' season starts around here, they fish more than they work :-). But that is, after all, what owning your own business is ALL about. They do EXCELLENT work for me and quick too, when it ain't fishin season. |
#7
|
|||
|
|||
Hawking: An unsolicited endorsement for Speaker Re-coning
It's good to a reference to someone who provides a valuable service and who does professional work for a very fair price. Pete |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Speaker re-coning recommendations?? | Boatanchors | |||
Speaker re-coning recommendations? | Swap | |||
1949 JENSEN SPEAKER Duplex Speaker | Swap | |||
FA:Tubes:5881,12AX7,71A,45 more coning | Equipment | |||
FA:Tubes:5881,12AX7,71A,45 more coning | Equipment |