Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old April 23rd 08, 09:35 PM posted to rec.radio.amateur.boatanchors
external usenet poster
 
First recorded activity by RadioBanter: Apr 2007
Posts: 122
Default Cleaning Equipment exposed to tobacco smoke

Norm VE3CZI wrote:
I recently acquired a nice 1950 shortwave receiver but has been exposed to a
tobacco smoker during it's existance.
Anyone have good method of removing the film without damaging decals on
front panel?

Tnx...Norm VE3CZI



I'll second the motion of others with the use of 409 or Fantastic. Where
I do NOT use these cleaners is on the inner frequency calibration dials
of most equipment. For these, I use warm water and perhaps a bit of
diluted dish detergent. Another step I use is to wax the front panel
with Turtle Wax to get a uniform finish. Do this before reinstalling
all the knobs. For wrinkle cabinets, etc., Armour All does quite well.

de K3HVG

  #2   Report Post  
Old April 25th 08, 09:46 PM posted to rec.radio.amateur.boatanchors
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 114
Default Cleaning Equipment exposed to tobacco smoke

Thank You One & All for your many suggestions.
Will evaluate them all and sincerly appreciate your taking the time to offer
your suggestions.
I've got more than ONE old unit to restore...seems to be a passion lately,
after 40 years in Amateur Radio! Guess I have to use all the tubes I've
accumulated Hi!
73....Norm VE3CZI

"K3HVG" wrote in message
...
Norm VE3CZI wrote:
I recently acquired a nice 1950 shortwave receiver but has been exposed
to a tobacco smoker during it's existance.
Anyone have good method of removing the film without damaging decals on
front panel?

Tnx...Norm VE3CZI



I'll second the motion of others with the use of 409 or Fantastic. Where I
do NOT use these cleaners is on the inner frequency calibration dials of
most equipment. For these, I use warm water and perhaps a bit of diluted
dish detergent. Another step I use is to wax the front panel with Turtle
Wax to get a uniform finish. Do this before reinstalling all the knobs.
For wrinkle cabinets, etc., Armour All does quite well.

de K3HVG



  #3   Report Post  
Old May 3rd 08, 10:31 PM posted to rec.radio.amateur.boatanchors
external usenet poster
 
First recorded activity by RadioBanter: Mar 2007
Posts: 38
Default Cleaning Equipment exposed to tobacco smoke

THE BEST I HAVE EVER FOUND IS "GO-JOE" OR SIMILAR SUGAR BEET BASED HAND
CLEANER. IT WON'T HURT ANYTHING, ITS SUPERB FOR CLEANING WRINKLE OR
SIMILIAR FINISHES TOO. IT WAS THE ONLY THING THAT WAS USED IN AN
AIRLINE AVIONICS LAB WERE I WORKED SOME 45 YEARS AGO. WAOABI



CHECK MY WEBSITE: www.dialcover.com
Bill Turner, excuse caps, short answers, stroke.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Where there's smoke..... Jack Schmidling Homebrew 0 May 29th 07 06:13 AM
Eton E-10 Up In Smoke [email protected] Shortwave 2 August 3rd 06 04:23 PM
Eton E-10 Up In Smoke James Douglas Shortwave 16 July 25th 06 07:35 AM
Cleaning House Sale on Equipment Jmap702 Swap 0 November 22nd 04 02:07 PM
Tobacco film removal Theo Boatanchors 3 August 7th 03 01:55 PM


All times are GMT +1. The time now is 02:39 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017