Home |
Search |
Today's Posts |
#8
|
|||
|
|||
SX-42 for $2250.00 how did I miss it?
NoSPAM wrote:
"Scott Dorsey" wrote in message ... Antonio Vernucci wrote: Can any one explain the rationale behind using both octal and loctal tubes in the SX-42? Loctal tubes were really cheap on the surplus market at the time? I believe the lone Loctal tube was a 7F8; at least this the tube used in my SX-43. If you want to read more about this particular tube, check out the volume on components from the MIT Radiation Laboratory series. If memory serves, this dual triode was rated to much higher frequencies than any dual triode that had an octal base. These tubes are still available NOS. However, if you are willing to make an adapter or rewire the receiver, I believe a 12AT7 can be used. Of course, if you want "museum quality", which I think is rather foolish, use the 7F8. 73, Dr. Barry L. Ornitz WA4VZQ This is true, it was a very high performance tube. But it's also true that after the war a lot of equipment came out using surplus loctal tubes; I have a Philco table radio that is all-loctal. Incidentally, Barry.... welcome back. I don't think I have seen your name on Usenet for more than fifteen years and it's great to see you here again. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS Spare parts for Plessey PR-2250 receiver | Swap | |||
FS Spare parts for Plessey PR-2250 receiver | Shortwave | |||
FS Spare parts for Plessey PR-2250 receiver | Equipment | |||
FS Spare parts for Plessey PR-2250 receiver | Equipment | |||
FS Spare parts for Plessey PR-2250 receiver | Equipment |