Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
I would need a picture and have a go at it in the Garage. The garage is my
junk box, especially according to my wife :~) I have old chassis laying around to scrounge from and boxes of unsorted assorted parts. It is summer and I could use some time going over some stuff with the garage doors open. Paul P. "MoiInAust" wrote in message ... Thanks Paul. But range 3 (the one affected) seems to work OK. And I have some beehives if I have to do a dirty fix! But, tell me, does your junk box have those tubular trimmers 2-2pf? "Paul P" REMOVE paul @ REMOVE ppinyot . REMOVEcom wrote in message ... "MoiInAust" wrote in message ... Oh dear! I think I've hit a bad snag with my AR88D restoration. I was trying to solder a lead back onto one of those trimmer caps (I mean condensers!) under the chassis (in the front box). It is C22 (a 2-12 pf air trimmer, range 3 high end osc). The solder would not take and then after applying an 80 watt iron for some time the cap itself suddenly started to melt! I stopped immediately. Have I destroyed it? Are spares possible to get or can I use another type in this instance of desperation? Check for shorts. If it is send me a picture & size and I will go look in the junk box and see if I have something close for you. Paul P. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
XM radio woes.... | Shortwave | |||
RFI woes | Shortwave | |||
24 GHz woes? | Policy | |||
Cell phone woes | Policy | |||
Magloop woes | Antenna |