Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Crystal phasing & single signal reception
"Michael Black" wrote in message
news:alpine.LNX.2.02.1308241914010.27526@darkstar. example.org... On Sat, 24 Aug 2013, gareth wrote: I wonder if some more experienced and senior (in the literal sense) amateur could explain to me one difficulty that I have in understanding single signal reception with the crystal phasing control? AIUI, the phasing control is adjusted so that the frequency that would give the audio image is phased out by being in the notch. When I had an SP-600, I don't remember using the phasing control much. I'd leave it somewhere, I'd set the BFO and all was generally fine. When that type of filter came along, it didn't replace anything, it added something (so there was a wave of commercial receivers where you could get two models, one without the filter, the other with the filter). The single signal was because it suddenly did get rid of the audio image. I think that it can only do that if the CIO / BFO is half way between the peak and the notch? Tghe phasing control doesn't really change that, it allows some level of control and you also get a notch at the same time. If the notch is variable, then it will be some other audio frequency which would be notched out (clearly you'd go for the most troublesome interference, but that would not necessarily be the audio image) TNX FER contribution OM |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
single rebate date , single recommended price , single recommended price | Dx | |||
Phasing Verticals | Antenna | |||
DRM signal and reception compared to analogue .... | Shortwave | |||
Radio Shack PRO-97 No reception of audio signal | Scanner | |||
Single frequency (channel) TRF for AM/BCB reception? Candidate Radios of Yesteryear? | Shortwave |