On Saturday, August 23, 2014 3:34:54 PM UTC-7, supremme wrote:
I recently purchased a swan 500c, according to the seller in good

condition, but had not the power supply. I have a Henry tempo of an old

one (yaesu ft200) supports this power supply with swan 500c? I have been

looking for the characteristics and voltages seem to be correct, but I

have no info intensities. I measured the voltages on the power supply of

one tempo a -118, 352, 670 vdc. in the voltage of 300VDC in the swan

500c what is 325vdc max in one tempo I have 352, with load, when they

should be 300VDC. not if it is a problem of the source of one tempo or

so. my question is? I can put the swan 500c in power supply one tempo?

thank you


The 500C power supply (117-XC) shows Pin 8 +800 VDC, Pin 7 +275 VDC, Pin 6, +12 VDC (Relay), Pin 5, Ground Pin 4, 12.6 Volts AC-DC Pin 3, -110 Pin 2, Switch
Pin 1, Switch
800 Volts @ 250 ma. Average, 700 ma, peak
275 Volts at 150 ma, continuous
110 volts negative bias, at 100 ma.
12 volts D.C at 200 ma, relay supply
Hope this helps.






--

supremme

the