and have been told the RF output should be around 130 watts. Can
someone tell me where/what pot to adjust to increase the RF output ? I


Adjust VR8 for 110 watts output. VR8 is on the main signal board,
underneath. Locate it as follows: With the radio upsidedown and the
front panel toward you, look to the left of center of the board,
slightly toward you. Locate connector 5 (8 pins). Directly above (away
from you) is a pot. Directly to the right of that pot is VR8. To
verify, VR8 has a pot directly to its right and one directly toward
you.

Brian