About Us

October 10th 03, 06:47 PM

(Ron) wrote in
:

Hi
This looks like a sensible news group! who but sensible people
would want to repair and play with Old Knackered Radios )
Being a lonely Brit trying to refurbish an old American Radio
I'm a bit stuck, I have repaired the old girl and it works very
well after sitting in a garage for many years as a home for
spiders, But I can't seem to align it correctly in as much as
I can't get the osc to track the dial reading and keep it in
good spec across the band? also I'm a bit worried about the
bandspread dial, it reads 100 with the tuning cap fully in
this means as you go up from 0 to 100 you are going down in
frequency? is this right? or has someone strung the dial cord
incorrectly? do I align it with the bandspead cap fully meshed
or not? I could really do with the alignment instructions has
anyone got them out there? I've looked for a manual but they
either want lots of $ (whatever they are ) or the ones that
are available don't have the circuit or alignment details (
Also Are there any transfers or refurb material available
I'd love to respray it but don't want to lose the original
transfers or logo, any help very welcome
from Ron G3YUH

I recently aligned my S-77 using the instruction from the BAMA site. Not
hard at all.

Keep in mind, very important - make sure that the first thing you check is
the range of the tuning dial. If this is off (mine was) it can cause all
kinds of trouble. There are index marks at each end to set it's travel.

I was able to get all bands quite close except for the high one. It tracks
fine at low end, but above 30 MHz it's off. I messed with it awhile and let
well enough alone. Who listens above 30 MHz anyway? I set it to track
correctly on 19 and 16 meters.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Hallicrafters SX-43 ($30)	WZ1U	Boatanchors	0	August 23rd 03 12:24 AM
WTB - Hallicrafters S53 main tuning knob	[email protected]	Boatanchors	0	August 20th 03 03:33 AM
FS: National, Millen, and Hallicrafters and Vibroplex Stuff	Dave Hollander	Boatanchors	0	August 16th 03 07:38 PM
FS Hallicrafters BC-610-II have a Hallicrafters BC-610I that looks like it has not many hours usage. It has been stored for about 15 years until discovered by me a few days ago. The cabinet is in excellent shape for a 60 year old rig. Three tubes	ac5tx	Boatanchors	0	July 28th 03 11:30 PM
FA: Working Hallicrafters S-85 receiver on Ebay	GS	Boatanchors	0	July 3rd 03 06:29 AM

Menu

About Us