| Home |
| Search |
| Today's Posts |
|
|
|
#1
December 5th 03, 03:31 AM
|
|||
|
|||
Out of curiosity, where are you guys reading the output of the IF? After
the detector or right at the transformer output? Thanks -- Brian Denley http://home.comcast.net/~b.denley/index.html "Frank Dresser" wrote in message ... "geojunkie" wrote in message om... I think you just turned the light on for me. I have been sweeping through a much broader range and this is what was causing the BFO to swing through 0hz. |
|
#2
December 5th 03, 06:47 AM
|
|||
|
|||
|
"Brian Denley" wrote in message news:f_Szb.306235$ao4.1051208@attbi_s51... Out of curiosity, where are you guys reading the output of the IF? After the detector or right at the transformer output? Thanks -- Brian Denley http://home.comcast.net/~b.denley/index.html If I remember the Hallicrafters instructions correctly, it's the AF voltage at the speaker terminals with the BFO on. I'd rather watch the DC voltage at the detector/AVC line. But it's been a while. Frank Dresser |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
