Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Ray,
Funny you should ask. I've been fixing up an HW-101 I bought years ago ($20!), and I'm now using it as a backup rig. Actually, the receiver performance is very impressive. I'm still chasing down a minor AGC problem, but otherwise its fully functional. Like your first one, mine was poorly built and I had to fight through lots of cold solder joints and a couple of mis-wired circuits. Took some time, but I enjoy this sort of thing. Cheap therapy! I'd suggest using parts from the rig with the butchered panel to restore the other one. BTW: the only mod mine has is a fan bolted to the finals cage. Probably a good thing to have. Good luck! Steve W6SSP p.s.-I heard a heathkit net on 20 meters last Sunday...didn't log the frequency, but the time was about 1 PM PST. Might be worth checking out. Ray Collins *remove wrote in message ... I just received a second one off E-Bay. The first one has some problems, looks good but wired badly, audio hum, but no signal . The wiring is immaculate on the second one, the guy did a really nice job. Now the problem, there are six added switches on the front panel of the second one. Looks like W9NJG built it as his call and SS number are ingraved. I doubt if he performed the mods. Big resistor network for a dummy load is mounted inside, added resistors.(in other words a mess) Also a big muffin fan was added over the finals. The mods are the problem anybody know what they would do? One is labeled (in pencil) Lo Hi another has Spkr and I can't make out the other side. The quandry is which one to save? Raymond VA7 MGB |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Viking Invader 2000 Restoration Questions | Boatanchors | |||
Hallicrafters SX-101a - Restoration Questions | Boatanchors | |||
Restoration | Boatanchors | |||
Restoration | Boatanchors | |||
Need BC-610I parts for restoration | Boatanchors |