Home |
Search |
Today's Posts |
#4
|
|||
|
|||
If the low side is stopping at X.055, the high side must be stopping as high
as 590 If yes: You may have to physically loosen the dial disk shaft screw and "Walk it" to get the spread center. Then go to X.000 (this worked on my 301 with the TRW) and use the trimmer cap to "pull down" to X.000. If you like mark the shaft befor moving it See if that works if not you have to operate, I never had to open the PTO on the SBXX1 series. Its a simple enough try -Joe |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: Heathkit Stuff - Manuals, Parts, Radios | Equipment | |||
FS: Heathkit Stuff - Manuals, Parts, Radios | Equipment | |||
FS: NOS Heathkit Manuals and Other Literature | Equipment | |||
FS: NOS Heathkit Manuals and Other Literature | Equipment |