Any BC610 users out there? I've had one holding down the shack for years
but have been half afraid to put it on the air. I did power it up without
the final and mods in their sockets and found that the exciter works OK.
Any cautions I need to watch out for?

Thanks and 73,
Dube K4DWW

Duby Todd wrote:

Any BC610 users out there? I've had one holding down the shack for years
but have been half afraid to put it on the air. I did power it up without
the final and mods in their sockets and found that the exciter works OK.
Any cautions I need to watch out for?

Thanks and 73,
Dube K4DWW





I had one about twenty five years ago. I fixed the TVI problem by adding
a low value
capacitor from the final grid to ground and put a small value coil in
the grid lead.
That made a low pass filter in the feed to the final. It worked great.
But I didn't
keep any record of the values I used so you are on your own.

I wish I had kept that transmitter.

Bill k7NOM

Try this group http://groups.yahoo.com/group/T-368_BC-610/
lots of heavy metal users there.


"Duby Todd" wrote in message
...
Any BC610 users out there? I've had one holding down the shack for years
but have been half afraid to put it on the air. I did power it up without
the final and mods in their sockets and found that the exciter works OK.
Any cautions I need to watch out for?

Thanks and 73,
Dube K4DWW