Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
On Thu, 09 Jun 2005 04:22:24 -0400, -ex- wrote:
Dirty Q. Tip wrote: Will do. Thanks a bunch! Just recollecting out loud...I recall the VHF 2-way rigs of that era that were solid-state with a tube final that audibly squealed internally on xmt. I'm not sure why but that was pretty common. solid state 'vibrator' PS for the B+? The fact that your Halli squeals may be a good sign rather than a bad one. I'd still do the recapping/check resistor rote. -Bill Well, at any rate, I've got the Sams Photofact #6 in transit. I'm not about to start pulling out caps and resistors without a "map" to guide me. Sure, I've got the schematics from Hallicrafters, but I'd rather have two schematics by diffrent publishers to compare, and one CB to work with. I hate it when one reference book says "it goes here," and "here" doesn't exist. Also, I notice no one has free scats for the CB-5 Mark II Hallicrafters. I might have to rectify this situation for the benefit of "us all" in the near future. |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FA: Hallicrafters HT-40 Mark 1 Transmitter | Swap | |||
FA: Hallicrafters SX-100 Mark II Shortwave Ham Radio | Shortwave | |||
FA: Hallicrafters SX-100 Mark II Ham Shortwave Radio | Swap | |||
FA: Hallicrafters SX-62A Mark 2A Receiver | Swap | |||
FA: Hallicrafters SX-62A Mark 2A Receiver | Swap |