| Home |
| Search |
| Today's Posts |
|
#5
|
|||
|
|||
|
With any luck, you won't have to clean the contacts again for a
couple of years. Group (and Chuck) Well , back to the tubes... The tr4c is fine till fully warmed than the problem comes back. Recap; After TX (cw) when relay releases, the RX sounds some times muted but still there, the S-meter will rise up the scale to about 40+ and the rx freq is off a bit (like on the wrong sideband) If I re-Key, all will return to normal...this problem will happen about 50% of the time... looks like relay is fine), but more like the mute curcuit is hanging...??? Relay cleaned but problem pops up when fully warmed up after 20+ mins, I'm going to pick up a new vox curcuit tube (6fq7) and replace to eliminate that... will post results. Tom |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| OT EMI problem with stove and internet connection | Homebrew | |||
| Wanted: Drake TR4C Transceiver. | Boatanchors | |||
| Wanted: Drake TR4C Transceiver | Boatanchors | |||
| Drake TR-3 transceiver synthesizer upgrade | Homebrew | |||
| Drake TR-3 transceiver synthesizer upgrade | Homebrew | |||