Menu

Marti M-30B

Search this Thread

Prev

Previous Post

Next Post

Next

#4

Report Post

Old

March 14th 10, 06:29 PM posted to rec.radio.broadcasting

John Higdon[_2_] John Higdon[_2_] is offline

John Higdon[_2_] is offline

external usenet poster

First recorded activity by RadioBanter: Oct 2009

Posts: 81

Default

Marti M-30B

In article ,
(Scott Dorsey) wrote:

I am assuming that if I really wanted to reduce the power, the sane thing
to do would be to reduce the B+ voltage to the final?

Of course, there are numerous ways to trim the output stage power.
Adjusting plate voltage is one, but to avoid over-dissipating the
screen, both screen and plate voltage should be adjusted together.
Another way is to adjust the loading, as you mentioned earlier. Due to
those "sweetspot" considerations that I mentioned, the loading should
only be used for minor power adjustments during operation. As I'm sure
you are aware, stage tuning and loading go hand in hand.

Yup. I was hoping to find someone old enough to remember setting these
things up for regular use. I dragged this one out and started cleaning it
up because the 160 MHz auxiliary channels are totally unused in our area,
and the 950 Mhz stuff is very crowded. And you know, this thing doesn't
sound bad. Down 3dB at 8 Khz which may be a transformer issue.

We're using the 160MHz channels in our area as well, since everyone else
went to 450MHz. But I've only had to deal with RPU gear in the past ten
years, so I missed the joys of Marti tube gear. FWIW, the very first
piece of auxiliary broadcast gear I ever laid hands on nearly forty
years ago was a Moseley PCL-303. It was solid state, of course, and back
then transistors that could operate at 950MHz were still considered
magic.

--
John Higdon
+1 408 ANdrews 6-4400
AT&T-Free At Last

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Radio Marti [VOA] on 7405 kHz @ 23:30 UTC	RHF	Shortwave	1	January 8th 09 06:32 AM
Old Marti junk wanted!	Scott Dorsey	Boatanchors	0	July 9th 07 02:25 AM
Troubleshooting Marti STL	Andrew Dickens	Broadcasting	3	April 22nd 04 04:03 AM
Radio Marti A04	N8KDV	Shortwave	2	April 2nd 04 06:13 PM
radio marti question	john hawkins	Shortwave	1	September 17th 03 05:19 AM

All times are GMT +1. The time now is 05:13 PM.

About Us

"It's about Radio"

Contact Us RadioBanter forum home Privacy Statement

Copyright © 2017