On 16 Sep 2006 07:46:07 -0700, "Telstar Electronics"
wrote in
.com:

Frank Gilliland wrote:
It's not his first amp..... more like his fifth or sixth. He's been
using this forum to spam his junk for years. Go back through the
archives and you will see discussions about the cheap, diode-biased,
class-C hacks he has tried to pass off as a "linear" amps. He even
went so far to defend the designs by saying that "Linearity is not
'required' for AM...."; invoking the flywheel effect when there was no
flywheel (tank) in the design; declaring that a 179 degree conduction
angle did not introduce any significant distortion, irrespective of
the low input impedance of the transistors pushing the conduction
angle closer to 120-150 degrees..... and a bunch of other technical
voodoo, hocus-pocus and nonsense. And all the time claiming to be a
professional engineer while dismissing (yet later incorporating) most
any constructive criticism.

Frank, still waiting to see your design... nuff said... LOL


Sorry, my design is proprietary at this time.

Frank Gilliland wrote:
Sorry, my design is proprietary at this time.

Frank, don't you mean nonexistent... LOL

www.telstar-electronics.com

On 16 Sep 2006 14:05:57 -0700, "Telstar Electronics"
wrote in
.com:

Frank Gilliland wrote:
Sorry, my design is proprietary at this time.

Frank, don't you mean nonexistent... LOL


Let's put it this way, Brian: Ampheads don't care if their signal is
clean or not, just BIG and LOUD. They don't care about biasing or
linearity or thermal protection.... on the contrary, most of them
actually -brag- when they blow a pill or smoke a resistor. In other
words, you are building your product for the wrong market! Since you
obviously failed your business courses, criticism of your designs was
intended to encourage you to pursue either an amateur license or a
professional career in electronics engineering. You have made big
strides in your electronics education in the past few years, but you
are still clinging to the notion of making easy money from illegal
amps. And because of that your "business" has stalled.

Get a -real- job, go back to school, learn all the things about
electronics and marketing that you -should- have learned before you
started this venture, then apply that education in a way that will let
you achieve your financial goals.

And -that-, dear Brian, is MY design.

Frank Gilliland wrote:
Let's put it this way, Brian: Ampheads don't care if their signal is
clean or not, just BIG and LOUD. They don't care about biasing or
linearity or thermal protection.... on the contrary, most of them
actually -brag- when they blow a pill or smoke a resistor. In other
words, you are building your product for the wrong market! Since you
obviously failed your business courses, criticism of your designs was
intended to encourage you to pursue either an amateur license or a
professional career in electronics engineering. You have made big
strides in your electronics education in the past few years, but you
are still clinging to the notion of making easy money from illegal
amps. And because of that your "business" has stalled.

Get a -real- job, go back to school, learn all the things about
electronics and marketing that you -should- have learned before you
started this venture, then apply that education in a way that will let
you achieve your financial goals.

And -that-, dear Brian, is MY design.

Frank, you're hopeless...

www.telstar-electronics.com

On 16 Sep 2006 17:12:45 -0700, "Telstar Electronics"
wrote in
om:

Frank Gilliland wrote:
snip
And -that-, dear Brian, is MY design.

Frank, you're hopeless...


Gee, you sure told -me-, huh?

Go away.

Frank Gilliland wrote:
Let's put it this way, Brian: Ampheads don't care if their signal is
clean or not, just BIG and LOUD. They don't care about biasing or
linearity or thermal protection.... on the contrary, most of them
actually -brag- when they blow a pill or smoke a resistor.

Frank, you seem to have a very low opinion of CBers... then why do you
seem to gravitate to this NG? What business could you possibly have
here with these CBers you loathe?... LOL

www.telstar-electronics.com

On 17 Sep 2006 09:08:40 -0700, "Telstar Electronics"
wrote in
.com:


Frank Gilliland wrote:
Let's put it this way, Brian: Ampheads don't care if their signal is
clean or not, just BIG and LOUD. They don't care about biasing or
linearity or thermal protection.... on the contrary, most of them
actually -brag- when they blow a pill or smoke a resistor.

Frank, you seem to have a very low opinion of CBers...


Wrong. I have a very low opinion of "ampheads". I have absolutely
nothing against CBers since I happen to be one myself. There are lots
of decent CBers out there and in the group.

"Telstar Electronics" wrote:
Frank Gilliland wrote:
Let's put it this way, Brian: Ampheads don't care if their signal is
clean or not, just BIG and LOUD. They don't care about biasing or
linearity or thermal protection.... on the contrary, most of them
actually -brag- when they blow a pill or smoke a resistor.

Frank, you seem to have a very low opinion of CBers.

No he doesn't. Try reading your buddy slow codes posts concerning CB.

www.telSPAM//SLAP