| Page 1 of 2 | 1 | 2 |
|
|
What happened to the SkyWave?
On Apr 26, 10:51 am, james wrote:
Considering his retail outlet, Ebay, has blocked every attempt to sell the product, His sales has probably been rather low. Thus not profitable. Also the fact that the amp is rather low powered for most "competition" CBers and with the plethera of older 100+ plus ham rigs out on the market, there is not a large market for his amp. Who needs an five watt radio, and a 100 watt amp to drive a big competion amp when you can get a Kenwood TS440 or similar and use it. Always good to hear from James the student... He's been attending college going on 17 years now. Maybe some day he'll get his bachelors degree. www.telstar-electronics.com |
What happened to the SkyWave?
On Apr 27, 2:05 pm, "Mike Hunt" wrote:
Skywave CB amplifier released October 2006 Skywave CB amplifier discontinued April 2007 LOL LOL LOL LOL LOL LOL Mike, the previous model of the Skywave was sold sucessfully for many years. It was only the latest 2879ABTC model with the temperature compensated biasing that was offered in 2006... and then discontinued in 2007. This was due to the increased cost of the new version. www.telstar-electronics.com |
What happened to the SkyWave?
On 26 Apr 2007 11:57:06 -0700, Telstar Electronics
wrote: +++On Apr 26, 10:51 am, james wrote: +++ Considering his retail outlet, Ebay, has blocked every attempt to sell +++ the product, His sales has probably been rather low. Thus not +++ profitable. Also the fact that the amp is rather low powered for most +++ "competition" CBers and with the plethera of older 100+ plus ham rigs +++ out on the market, there is not a large market for his amp. Who needs +++ an five watt radio, and a 100 watt amp to drive a big competion amp +++ when you can get a Kenwood TS440 or similar and use it. +++ +++Always good to hear from James the student... +++He's been attending college going on 17 years now. +++Maybe some day he'll get his bachelors degree. +++ +++www.telstar-electronics.com ********** Brian I have one degree and thanks for the complement. At least I am still learning. Learning is good. It is when you stop learning is when you are dead. james |
What happened to the SkyWave?
On Apr 27, 10:19 pm, james wrote:
On 26 Apr 2007 11:57:06 -0700, Telstar Electronics wrote: +++On Apr 26, 10:51 am, james wrote: +++ Considering his retail outlet, Ebay, has blocked every attempt to sell +++ the product, His sales has probably been rather low. Thus not +++ profitable. Also the fact that the amp is rather low powered for most +++ "competition" CBers and with the plethera of older 100+ plus ham rigs +++ out on the market, there is not a large market for his amp. Who needs +++ an five watt radio, and a 100 watt amp to drive a big competion amp +++ when you can get a Kenwood TS440 or similar and use it. +++ +++Always good to hear from James the student... +++He's been attending college going on 17 years now. +++Maybe some day he'll get his bachelors degree. +++ +++www.telstar-electronics.com ********** Brian I have one degree and thanks for the complement. At least I am still learning. Learning is good. It is when you stop learning is when you are dead. james James... your degree in basket-weaving hardly makes you a viable critic out on this NG. You definately need your continued learning experience. http://www.telstar-electronics.com/d...cialOffers.htm |
What happened to the SkyWave?
On 28 Apr 2007 06:11:49 -0700, Telstar Electronics
wrote: +++On Apr 27, 10:19 pm, james wrote: +++ On 26 Apr 2007 11:57:06 -0700, Telstar Electronics +++ +++ wrote: +++ +++On Apr 26, 10:51 am, james wrote: +++ +++ Considering his retail outlet, Ebay, has blocked every attempt to sell +++ +++ the product, His sales has probably been rather low. Thus not +++ +++ profitable. Also the fact that the amp is rather low powered for most +++ +++ "competition" CBers and with the plethera of older 100+ plus ham rigs +++ +++ out on the market, there is not a large market for his amp. Who needs +++ +++ an five watt radio, and a 100 watt amp to drive a big competion amp +++ +++ when you can get a Kenwood TS440 or similar and use it. +++ +++ +++ +++Always good to hear from James the student... +++ +++He's been attending college going on 17 years now. +++ +++Maybe some day he'll get his bachelors degree. +++ +++ +++ +++www.telstar-electronics.com +++ +++ ********** +++ +++ Brian +++ +++ I have one degree and thanks for the complement. At least I am still +++ learning. Learning is good. It is when you stop learning is when you +++ are dead. +++ +++ james +++ +++ +++James... your degree in basket-weaving hardly makes you a viable +++critic out on this NG. +++You definately need your continued learning experience. +++ +++http://www.telstar-electronics.com/d...cialOffers.htm ************** Brian I don't have to defend my degree or my 23 yrs experience in electronic product development and manufacturing. At least not to you. The fact that you have aggresisvely persue to degrade me only serves to prove to me more that I am correct in my judgement in you success in choice of products and ability to market them. james |
What happened to the SkyWave?
On Apr 28, 2:10 pm, james wrote:
Brian I don't have to defend my degree or my 23 yrs experience in electronic product development and manufacturing. At least not to you. The fact that you have aggresisvely persue to degrade me only serves to prove to me more that I am correct in my judgement in you success in choice of products and ability to market them. Me degrade you... Now that's a switch. You can dish it out but can't take it? As for defending your degree... don't bother. It hard to defend something you don't have... lol www.telstar-electronics.com |
What happened to the SkyWave?
On 28 Apr 2007 12:29:22 -0700, Telstar Electronics
wrote: +++On Apr 28, 2:10 pm, james wrote: +++ Brian +++ I don't have to defend my degree or my 23 yrs experience in electronic +++ product development and manufacturing. At least not to you. +++ The fact that you have aggresisvely persue to degrade me only serves +++ to prove to me more that I am correct in my judgement in you success +++ in choice of products and ability to market them. +++ +++ +++Me degrade you... +++Now that's a switch. You can dish it out but can't take it? +++As for defending your degree... don't bother. It hard to defend +++something you don't have... lol +++ +++www.telstar-electronics.com +++ ************* Brian there is one thing you have said that is true. It is hard to defend what you don't have. Like Rhett Butler said to Chariolete, Frankly I don't give a dam what you really know and what you think you know. james |
What happened to the SkyWave?
On Apr 28, 9:47 pm, james wrote:
Brian there is one thing you have said that is true. It is hard to defend what you don't have. Like Rhett Butler said to Chariolete, Frankly I don't give a dam what you really know and what you think you know. Just remember that your derogatory comments started this exchange... I assure you that if you continue in the future, I will defend myself here on this forum. Enough said. www.telstar-electronics.com |
What happened to the SkyWave?
On 29 Apr 2007 06:11:49 -0700, Telspam Electronics
wrote in .com: On Apr 28, 9:47 pm, james wrote: Brian there is one thing you have said that is true. It is hard to defend what you don't have. Like Rhett Butler said to Chariolete, Frankly I don't give a dam what you really know and what you think you know. Just remember that your derogatory comments started this exchange... I assure you that if you continue in the future, I will defend myself here on this forum. Enough said. LOL!!! Where's that schematic, Brian? |
What happened to the SkyWave?
On Sun, 29 Apr 2007 18:11:55 -0700, Frank Gilliland
wrote: On 29 Apr 2007 06:11:49 -0700, Telspam Electronics wrote in s.com: On Apr 28, 9:47 pm, james wrote: Brian there is one thing you have said that is true. It is hard to defend what you don't have. Like Rhett Butler said to Chariolete, Frankly I don't give a dam what you really know and what you think you know. Just remember that your derogatory comments started this exchange... I assure you that if you continue in the future, I will defend myself here on this forum. Enough said. LOL!!! Where's that schematic, Brian? ROTFLMAO!!! |
What happened to the SkyWave?
On 29 Apr 2007 06:11:49 -0700, Telstar Electronics
wrote: +++On Apr 28, 9:47 pm, james wrote: +++ Brian there is one thing you have said that is true. It is hard to +++ defend what you don't have. Like Rhett Butler said to Chariolete, +++ Frankly I don't give a dam what you really know and what you think you +++ know. +++ +++ +++Just remember that your derogatory comments started this exchange... +++I assure you that if you continue in the future, I will defend myself +++here on this forum. Enough said. +++ +++www.telstar-electronics.com *********** Actually I don't think my first comments were derogatory about why the amp no longer is a marketable item. I was expounding my opinion as to why you suffered poor profit margins. If you found that was a derogatory remark then it maybe you who has the very thin skin. james |
What happened to the SkyWave?
On 27 Apr 2007 12:10:56 -0700, Telspam Electronics
wrote in . com: On Apr 27, 2:05 pm, "Mike Hunt" wrote: Skywave CB amplifier released October 2006 Skywave CB amplifier discontinued April 2007 LOL LOL LOL LOL LOL LOL Mike, the previous model of the Skywave was sold sucessfully for many years. Yet nobody claims to have bought one, owned one, or even to have seen one (other than the pics in the "literature" you have spammed in this group over the past ten years). It was only the latest 2879ABTC model with the temperature compensated biasing that was offered in 2006... and then discontinued in 2007. This was due to the increased cost of the new version. Really? And here I thought it was due to: 1. Incomplete/inadequate market research; 2. Blatantly hacked design; 3. Fabricated specifications; 4. Proof of non-linearity (in your own literature!!!); 5. Lack of product testimonials (credible or not); 6. Nine square feet (and many other demonstrations of technical incompetence in this group). But hey, I could be wrong..... was it -really- about cost? Weren't your customers willing to pay for the amp -before- you built it? (the ungrateful *******s!!!) Or was it because your welfare check wasn't large enough to cover the capital overhead? Or did mommy and daddy cut off your allowance? Get a job. |
What happened to the SkyWave?
On Sun, 29 Apr 2007 18:11:55 -0700, Frank Gilliland
wrote: +++On 29 Apr 2007 06:11:49 -0700, Telspam Electronics wrote in oups.com: +++ +++On Apr 28, 9:47 pm, james wrote: +++ Brian there is one thing you have said that is true. It is hard to +++ defend what you don't have. Like Rhett Butler said to Chariolete, +++ Frankly I don't give a dam what you really know and what you think you +++ know. +++ +++ +++Just remember that your derogatory comments started this exchange... +++I assure you that if you continue in the future, I will defend myself +++here on this forum. Enough said. +++ +++ +++LOL!!! Where's that schematic, Brian? +++ +++ ************* Actually it would be interesting to see a schematic. Just looking at the evaluation schematic and his photos on Ebay it is not just a copy of the evaluation board. So he had to put some thought behind it. At least give him credit for that. One thing is I am not going to pay that price to see a schematic or reverse engineer it to see how it works. Can do that from the specification. The only thing that bothers me is this is based on an IC that has been in production for at least 9 yrs. It cousin the SSM2165 has been obsoleted by the SSM2167. From ADI webpage I wonder how long the SSM2166 will remian in production? The 14 pin dip version is obsolete. Also for the SSM2166 the status column puts a contact ADI. It should be either not reccomended for new designs, obsolete or in production. I wonder if AD is considering obsoleting the part? james james |
What happened to the SkyWave?
On Mon, 30 Apr 2007 02:15:49 GMT, james wrote
in : On Sun, 29 Apr 2007 18:11:55 -0700, Frank Gilliland wrote: +++On 29 Apr 2007 06:11:49 -0700, Telspam Electronics wrote in roups.com: +++ +++On Apr 28, 9:47 pm, james wrote: +++ Brian there is one thing you have said that is true. It is hard to +++ defend what you don't have. Like Rhett Butler said to Chariolete, +++ Frankly I don't give a dam what you really know and what you think you +++ know. +++ +++ +++Just remember that your derogatory comments started this exchange... +++I assure you that if you continue in the future, I will defend myself +++here on this forum. Enough said. +++ +++ +++LOL!!! Where's that schematic, Brian? +++ +++ ************* Actually it would be interesting to see a schematic. Just looking at the evaluation schematic and his photos on Ebay it is not just a copy of the evaluation board. So he had to put some thought behind it. At least give him credit for that. He hacked the design from a page I cited several years ago while criticizing his earlier splatter-box. The only thought he had was how he could get away with the theft of someone else's intellectual property. His solution was to withhold the schematic. I guess he didn't realize that his amp could be reverse-engineered... duh!!! One thing is I am not going to pay that price to see a schematic or reverse engineer it to see how it works. Can do that from the specification. Not for that price, for sure. But his latest hack? Yep! I'm going to buy one and do a full -- and FAIR -- evaluation on my bench. I'm just waiting for him to go into "full production". The only thing that bothers me is this is based on an IC that has been in production for at least 9 yrs. It cousin the SSM2165 has been obsoleted by the SSM2167. From ADI webpage I wonder how long the SSM2166 will remian in production? I'm sure NTE will make replacements for ten times the original cost. The 14 pin dip version is obsolete. Also for the SSM2166 the status column puts a contact ADI. It should be either not reccomended for new designs, obsolete or in production. I wonder if AD is considering obsoleting the part? Which is one reason why I avoid ASICs. |
What happened to the SkyWave?
Frank Gilliland wrote:
On 27 Apr 2007 12:10:56 -0700, Telspam Electronics wrote in . com: On Apr 27, 2:05 pm, "Mike Hunt" wrote: Skywave CB amplifier released October 2006 Skywave CB amplifier discontinued April 2007 LOL LOL LOL LOL LOL LOL Mike, the previous model of the Skywave was sold sucessfully for many years. Yet nobody claims to have bought one, owned one, or even to have seen one (other than the pics in the "literature" you have spammed in this group over the past ten years). It was only the latest 2879ABTC model with the temperature compensated biasing that was offered in 2006... and then discontinued in 2007. This was due to the increased cost of the new version. Really? And here I thought it was due to: 1. Incomplete/inadequate market research; 2. Blatantly hacked design; 3. Fabricated specifications; 4. Proof of non-linearity (in your own literature!!!); 5. Lack of product testimonials (credible or not); 6. Nine square feet (and many other demonstrations of technical incompetence in this group). But hey, I could be wrong..... was it -really- about cost? Weren't your customers willing to pay for the amp -before- you built it? (the ungrateful *******s!!!) Or was it because your welfare check wasn't large enough to cover the capital overhead? Or did mommy and daddy cut off your allowance? Get a job. "LOL" |
What happened to the SkyWave?
On Apr 29, 9:34 pm, Frank Gilliland
wrote: One thing is I am not going to pay that price to see a schematic or reverse engineer it to see how it works. Can do that from the specification. Frank, you keep reminding us what a fantastic engineer you are... I really don't know why you couldn't just draw the schematic from the picture I have at http://www.telstar-electronics.com/d...evelopment.htm You should be able to do that with your eyes closed... lol www.telstar-electronics.com |
What happened to the SkyWave?
On Apr 29, 9:15 pm, james wrote:
The only thing that bothers me is this is based on an IC that has been in production for at least 9 yrs. It cousin the SSM2165 has been obsoleted by the SSM2167. From ADI webpage I wonder how long the SSM2166 will remian in production? The 14 pin dip version is obsolete. Also for the SSM2166 the status column puts a contact ADI. It should be either not reccomended for new designs, obsolete or in production. I wonder if AD is considering obsoleting the part? You're right about the DIP being obsolete. This is not an indicator that the SO will also go that route. I checked with Analog Devices before starting this project and they said there are no plans to discontinue at this time. Now, that really doesn't mean anything... but if they discontinue... they discontinue. My opinion is that this will not happen for perhaps five years. By the way... the "check with ADI" on their site has to do with availability at this time. It seems that this chip is undergoing a fab location change... probably moving to China (where else) and the location is not ready. The lead time for this chip right now is 36-38 weeks. It's fortunate I have plenty to get started... since brokers are getting upwards of $10 a piece for these right now. www.telstar-electronics.com |
What happened to the SkyWave?
On 30 Apr 2007 04:19:49 -0700, Telspam Electronics
wrote in .com: On Apr 29, 9:34 pm, Frank Gilliland wrote: One thing is I am not going to pay that price to see a schematic or reverse engineer it to see how it works. Can do that from the specification. Frank, you keep reminding us what a fantastic engineer you are... Wrong. I keep reminding -you- how bad an engineer -you- are. For example..... You've been spamming this group for over ten years now. In ten years you could have earned the bare-minumum AAS degree in electronics, which would have taken 2-3 years, leaving 7+ years to get some practical experience. Or you could have earned a bachelor's degree in electrical engineering and had 5+ years experience in a good-paying job. Even if you took the time to earn a Master's degree you could be 2+ years into a -very- lucrative career. It works, Brian. I've done it myself. I'm finishing up my Master's this summer, and just a couple months ago I got back on the horse and found another job as a BE that pays 42K/yr, which is 13K more than I was making at the other station. Yet YOU chose to spend your time and money on a scheme that has netted you nothing but problems and failure. You still live in your mommy's house and depend on public tax dollars to feed your fat face. You have no significant assets, no job security, and no means to support yourself let alone a family. If there is a girl somewhere on the planet that would have you it is only because she has less confidence and self-worth than you. You are in no better position now than you were 10 years ago. Just older. What a waste. Yes, I -am- a "fantastic engineer"..... by your standards. |
What happened to the SkyWave?
On Apr 30, 3:00 pm, Frank Gilliland
wrote: On 30 Apr 2007 04:19:49 -0700, Telspam Electronics wrote in .com: On Apr 29, 9:34 pm, Frank Gilliland wrote: One thing is I am not going to pay that price to see a schematic or reverse engineer it to see how it works. Can do that from the specification. Frank, you keep reminding us what a fantastic engineer you are... Wrong. I keep reminding -you- how bad an engineer -you- are. For example..... You've been spamming this group for over ten years now. In ten years you could have earned the bare-minumum AAS degree in electronics, which would have taken 2-3 years, leaving 7+ years to get some practical experience. Or you could have earned a bachelor's degree in electrical engineering and had 5+ years experience in a good-paying job. Even if you took the time to earn a Master's degree you could be 2+ years into a -very- lucrative career. It works, Brian. I've done it myself. I'm finishing up my Master's this summer, and just a couple months ago I got back on the horse and found another job as a BE that pays 42K/yr, which is 13K more than I was making at the other station. Yet YOU chose to spend your time and money on a scheme that has netted you nothing but problems and failure. You still live in your mommy's house and depend on public tax dollars to feed your fat face. You have no significant assets, no job security, and no means to support yourself let alone a family. If there is a girl somewhere on the planet that would have you it is only because she has less confidence and self-worth than you. You are in no better position now than you were 10 years ago. Just older. What a waste. Yes, I -am- a "fantastic engineer"..... by your standards. LOL... Frank... you'll never change. www.telstar-electronics.com |
What happened to the SkyWave?
Frank Gilliland wrote
-snip good life lesson for Brian I'm finishing up my Master's this summer, and just a couple months ago I got back on the horse and found another job as a BE that pays 42K/yr, which is 13K more than I was making at the other station. Masters, that should really help the bottom line. Good job OM! |
What happened to the SkyWave?
On 30 Apr 2007 04:29:42 -0700, Telstar Electronics
wrote: +++On Apr 29, 9:15 pm, james wrote: +++ The only thing that bothers me is this is based on an IC that has been +++ in production for at least 9 yrs. It cousin the SSM2165 has been +++ obsoleted by the SSM2167. From ADI webpage I wonder how long the +++ SSM2166 will remian in production? The 14 pin dip version is obsolete. +++ Also for the SSM2166 the status column puts a contact ADI. It should +++ be either not reccomended for new designs, obsolete or in production. +++ I wonder if AD is considering obsoleting the part? +++ +++You're right about the DIP being obsolete. This is not an indicator +++that the SO will also go that route. I checked with Analog Devices +++before starting this project and they said there are no plans to +++discontinue at this time. Now, that really doesn't mean anything... +++but if they discontinue... they discontinue. My opinion is that this +++will not happen for perhaps five years. By the way... the "check with +++ADI" on their site has to do with availability at this time. It seems +++that this chip is undergoing a fab location change... probably moving +++to China (where else) and the location is not ready. The lead time for +++this chip right now is 36-38 weeks. It's fortunate I have plenty to +++get started... since brokers are getting upwards of $10 a piece for +++these right now. +++ +++www.telstar-electronics.com ************ According to Digikey's webpage they have 320 in stock at $5.16 each single unit quantity. Avnet and Arrow have no stock and on teh SSM2166SZ they are quoting upwards to 16 week lead time. Now that is a mor erealistic lead time. 36 to 38 weeks tells me that the next production run of that IC is not scheduled for at least another 10 weeks and curent production runs are spoken for. I would say that this is not a super high run IC. Just enough though to keep the line open and do a RoHS conversion to the packaging. james |
What happened to the SkyWave?
On 30 Apr 2007 13:26:00 -0700, Telspam Electronics
wrote in . com: On Apr 30, 3:00 pm, Frank Gilliland wrote: snip Yes, I -am- a "fantastic engineer"..... by your standards. LOL... Frank... you'll never change. I have everything I want (except maybe for adequate representation in Congress). I have no need or desire to change. You, OTOH..... "LOL"!!! Where's that schematic, Brian? |
What happened to the SkyWave?
On Mon, 30 Apr 2007 15:58:55 -0700, Frank Gilliland
wrote: On 30 Apr 2007 13:26:00 -0700, Telspam Electronics wrote in .com: On Apr 30, 3:00 pm, Frank Gilliland wrote: snip Yes, I -am- a "fantastic engineer"..... by your standards. LOL... Frank... you'll never change. I have everything I want (except maybe for adequate representation in Congress). I have no need or desire to change. You, OTOH..... "LOL"!!! Where's that schematic, Brian? Damn you are right he has been here spamming for at least 10 years. I think I remember the 1st time I saw him here. He was arguing with a guy called painkiller from the bayou area. Of course arguing about whose amp is better. I think that was before he even tried to copy someones amp schematic. |
What happened to the SkyWave?
On Apr 30, 10:05 pm, Apple Eater wrote:
Damn you are right he has been here spamming for at least 10 years. I think I remember the 1st time I saw him here. He was arguing with a guy called painkiller from the bayou area. Of course arguing about whose amp is better. I think that was before he even tried to copy someones amp schematic.- Hide quoted text - And I'll be here long after your apple has dried up and turned brown... lol http://www.telstar-electronics.com/d...cialOffers.htm |
What happened to the SkyWave?
On 1 May 2007 02:51:53 -0700, Telspam Electronics
wrote in om: On Apr 30, 10:05 pm, Apple Eater wrote: Damn you are right he has been here spamming for at least 10 years. I think I remember the 1st time I saw him here. He was arguing with a guy called painkiller from the bayou area. Of course arguing about whose amp is better. I think that was before he even tried to copy someones amp schematic.- Hide quoted text - And I'll be here long after your apple has dried up and turned brown... lol I seriously doubt you will be here much longer. So when do you plan to have your audio box in full production? I can't wait to get one on the bench!!! |
What happened to the SkyWave?
On May 1, 6:04 am, Frank Gilliland
wrote: I seriously doubt you will be here much longer. So when do you plan to have your audio box in full production? I can't wait to get one on the bench!!! Why would you say something like that. I was here well before you got here... and I'll be here well after you have left. As for my "audio box"... why would you want to get one on your bench? You say it doesn't work... and is a piece of junk. So why bother? Your a great designer... why don't you just whip up something better? You're not making sense again Frank.... lol www.telstar-electronics.com |
What happened to the SkyWave?
On May 1, 6:04 am, Frank Gilliland
wrote: So when do you plan to have your audio box in full production? I can't wait to get one on the bench!!! Here's another hacker Frank... http://www.mfjenterprises.com/man/pdf/MFJ-653.pdf Better get after him... lol www.telstar-electronics.com |
What happened to the SkyWave?
On May 1, 11:43 am, wrote:
frank why do you supoose he is leaving It takes a hell of lot more to shove somebody out the door in usenet than a few pointed remarks You tell em mork... lol www.telstar-electronics.com |
What happened to the SkyWave?
On 1 May 2007 04:16:41 -0700, Telspam Electronics
wrote in . com: On May 1, 6:04 am, Frank Gilliland wrote: I seriously doubt you will be here much longer. So when do you plan to have your audio box in full production? I can't wait to get one on the bench!!! Why would you say something like that. I was here well before you got here... I don't think so, Brian. and I'll be here well after you have left. Doubtful. As for my "audio box"... why would you want to get one on your bench? You say it doesn't work... and is a piece of junk. So why bother? To do a fair evaluation. If it works as well as you say then I'll be eating my words, but I don't think that's going to happen. Your a great designer... why don't you just whip up something better? There's already plenty of stuff out there that -does- work. Why would I make something that is redundant? You're not making sense again Frank.... lol What doesn't make sense is why you would want to manufacture a device that has no potential for profit -- unless it's part of a bigger scam. |
What happened to the SkyWave?
On Tue, 01 May 2007 12:43:41 -0400, wrote in
: snip woghger you are a Congress all in your own head Take your meds and shut up. |
What happened to the SkyWave?
On May 1, 3:00 pm, Frank Gilliland wrote:
There's already plenty of stuff out there that -does- work. Why would I make something that is redundant? Maybe you could give us a list of products that are comparable to mine in performance and size. www.telstar-electronics.com |
What happened to the SkyWave?
On 1 May 2007 13:46:24 -0700, Telspam Electronics
wrote in . com: On May 1, 3:00 pm, Frank Gilliland wrote: There's already plenty of stuff out there that -does- work. Why would I make something that is redundant? Maybe you could give us a list of products that are comparable to mine in performance and size. Sure, but first I'll need one of your devices to run across the bench so I can determine your definition of "performance" (due to the very real possibility that you got the definition from the same dictionary as you got the definition of "linear"). |
What happened to the SkyWave?
On May 1, 5:20 pm, Frank Gilliland wrote:
Sure, but first I'll need one of your devices to run across the bench so I can determine your definition of "performance" (due to the very real possibility that you got the definition from the same dictionary as you got the definition of "linear"). Again you have not provided any information to back your claims... and are evasive. End of conversation. www.telstar-electronics.com |
What happened to the SkyWave?
On 1 May 2007 15:53:06 -0700, Telspam Electronics
wrote in om: On May 1, 5:20 pm, Frank Gilliland wrote: Sure, but first I'll need one of your devices to run across the bench so I can determine your definition of "performance" (due to the very real possibility that you got the definition from the same dictionary as you got the definition of "linear"). Again you have not provided any information to back your claims... and are evasive. End of conversation. Waiting for the production of your voice box is not evasion -- it is called 'patience'. And just in case you have been stoned for the past ten years, this conversation will continue with or without you. |
What happened to the SkyWave?
On May 1, 8:22 pm, Frank Gilliland wrote:
Waiting for the production of your voice box is not evasion -- it is called 'patience'. And just in case you have been stoned for the past ten years, this conversation will continue with or without you. I have never seen anyone so anxious to get his hands on a device that he has proclaimed to be crap. Why would anyone (who is sane) have that on his agenda? Frank, you're starting to lose it again... As for carrying on the conversation without me... why should this be any different than any other post. You've been talking to yourself for years. www.telstar-electronics.com |
What happened to the SkyWave?
From: (Frank*Gilliland)
On 30 Apr 2007 04:19:49 -0700, Telspam Electronics wrote in .com: I'm finishing up my Master's this summer, and just a couple months ago I got back on the horse and found another job as a BE that pays 42K/yr, which is 13K more than I was making at the other station. Congrats on the adult-ed!!! Freakin' tough as nails to do it later in life. And with the price of everything skyrocketing, the extra chunk'a change will come in handy. So what's the plan for play? Doing anything interesting this summer? |
What happened to the SkyWave?
|
What happened to the SkyWave?
From: (Frank*Gilliland)
On Sat, 5 May 2007 11:37:02 -0400, (I AmnotGeorgeBush) wrote in : So what's the plan for play? Doing anything interesting this summer? No specific plans. Maybe I'll submit to my paranoia and begin stockpiling for 2012 :-0 Too funny. You been talking to Darren Dalton? |
What happened to the SkyWave?
From: (Frank*Gilliland)
Maybe I'll submit to my paranoia and begin stockpiling for 2012 :-0 Too funny. You been talking to Darren Dalton? I've never heard of any Darren Dalton. I'm just a firm believer of self-fulfilling prophecy. Dalton was a pro ball player for the Phillies (I think, I'm not much of a baseball fan). He lives around here and can often be found in a certain local bar talking about how the world is going to end in 2012 and how the aliens were in command of his body when he hit home runs. Hell of a nice guy, though. |
| All times are GMT +1. The time now is 07:27 AM. |
|
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com