On Apr 26, 7:16 pm, Vinnie S. wrote:
Do I inject a 1 KHz tone right into the mic plug, or do I have to go thru the
mic?

I would definately use the mic you plan to use with the rig. I usually
use 2KHz as a mid-point for audio (voice) adjustment. Then adj your
limiter accordingly. This should give you close to what you seek if
the 2KHz volume is at a reasonable level that would be representitive
of your voice.

P.S. If you had a Voicemax... you could adjust your modulation for
100%... and it would stay at 100% from 100Hz-20KHz... when you were
whispering or screaming. That's the beauty of an AGC...

www.telstar-electronics.com