Frequently Asked Questions

â–º Does VoiceMax use signal clipping to achieve compression?
No, signal clipping causes distortion and produces audio that sounds
“fuzzy�. VoiceMax uses a sophisticated automatic gain control circuit
to maintain audio at a constant level with distortion well below 1%.


â–º Can I install the VoiceMax module myself?
Yes, but for optimum results the installer should have access to an
oscilloscope. The oscilloscope will be used in adjusting the output
level of the VoiceMax module so that the transmitter will not over
modulate.


â–º Can I use a power or condenser microphone with VoiceMax?
No. Due to VoiceMax’s high gain we recommend that only non-amplified
dynamic type microphones be used. Power and condenser microphones
contain amplifiers that are generally incompatible with VoiceMax.
There are many aftermarket microphones that work well with VoiceMax...
such as Astatic 611L, Astatic 636L, Astatic 651, and others.


â–º What is a noise gate?
A noise gate is a feature that allows low-level sounds to be subdued.
This is very useful in a mobile environment, where road noise can be a
problem. VoiceMax’s noise gate threshold level is adjusted once during
installation, based on user preference.


â–º Does VoiceMax require a battery?
No, the power required for the VoiceMax module is extremely low, and
is derived from inside the transceiver.


â–º How big is the VoiceMax module?... And will it fit inside my radio?
The size of the VoiceMax module is 1.6� x 1.6� x 0.32� utilizing
surface mount electronic technology. This small size should fit inside
most transceivers.


â–º How will I know the VoiceMax module is working?
VoiceMax has a modulation indicator LED that flashes in sync to audio
applied to the transceiver’s microphone. This LED is viewed during the
adjustment procedure, to make certain VoiceMax’s levels are set
properly for your transceiver.


â–º Should the VoiceMax module be operating all the time?
Yes! The VoiceMax module was designed to be active whenever your
transceiver is operating. This allows you to take advantage of
VoiceMax’s performance boost every time you transmit.

www.telstar-electronics.com

On Sun, 6 Jan 2008 06:04:19 -0800 (PST), Telstar Electronics
wrote:

Frequently Asked Questions

Q: How will I acheive 30 sales per month on ebay?


A: I won't


http://search-completed.ebay.com/sea...is=200&guest=1

Vinnie S.

"Vinnie S." wrote in message
...
On Sun, 6 Jan 2008 06:04:19 -0800 (PST), Telstar Electronics
wrote:

Frequently Asked Questions

Q: How will I acheive 30 sales per month on ebay?


A: I won't


http://search-completed.ebay.com/sea...is=200&guest=1

Vinnie S.

IN HIS ****ING WET DREAMS.

At least "I" have money coming in from my work. CBs is not my bread winner.
I got away from them LONG ago.
I'm doing these as a favor.

His golden screw driver is buried so deep in his ass - his mind is warped.
Thats why "he" dreams as he does.

On Jan 6, 11:01*am, "radiosrfun" wrote:
At least "I" have money coming in from my work. CBs is not my bread winner..
I got away from them LONG ago.
I'm doing these as a favor.
His golden screw driver is buried so deep in his ass - his mind is warped.
Thats why "he" dreams as he does.

That's why I like you guys... you're always good for a laugh.
Keep asking everybody out here for more advice on how to further
"hack" some additional radios... lol

On Sun, 6 Jan 2008 10:04:22 -0800 (PST), Telstar Electronics
wrote:

On Jan 6, 11:01*am, "radiosrfun" wrote:
At least "I" have money coming in from my work. CBs is not my bread winner.
I got away from them LONG ago.
I'm doing these as a favor.
His golden screw driver is buried so deep in his ass - his mind is warped.
Thats why "he" dreams as he does.

That's why I like you guys... you're always good for a laugh.
Keep asking everybody out here for more advice on how to further
"hack" some additional radios... lol


That is the 4th LOL he's used today. And now he's starting separate theads, Talk
about starved for attenion. Brian, get a girlfriend, you nerd.

Vinnie S.

On Sun, 6 Jan 2008 10:04:22 -0800 (PST), Telstar Electronics
wrote:

On Jan 6, 11:01 am, "radiosrfun" wrote:
At least "I" have money coming in from my work. CBs is not my bread
winner.
I got away from them LONG ago.
I'm doing these as a favor.
His golden screw driver is buried so deep in his ass - his mind is
warped.
Thats why "he" dreams as he does.

That's why I like you guys... you're always good for a laugh.
Keep asking everybody out here for more advice on how to further
"hack" some additional radios... lol

Hey - Jack off - you've made it very apparent - YOU CAN'T READ. "I" am not
"hacking" them, I'm repairing those which "were" hacked. Get a ****ing
clue - ASS HOLE.

You're so ****ing stupid - the only thing you know how to do - is SPAM this
group and put others down. And you call yourself a "business man" wanting
Customers? WRONG......... You're not a "businessman" - you're a blatant ASS
HOLE trying to hawk your ****ing garbage.

Again - GO **** YOURSELF. ****ing pathetic loser.

On Sun, 06 Jan 2008 16:12:43 -0500, Vinnie S.
wrote:

On Sun, 6 Jan 2008 10:04:22 -0800 (PST), Telstar Electronics
wrote:

On Jan 6, 11:01*am, "radiosrfun" wrote:
At least "I" have money coming in from my work. CBs is not my bread winner.
I got away from them LONG ago.
I'm doing these as a favor.
His golden screw driver is buried so deep in his ass - his mind is warped.
Thats why "he" dreams as he does.

That's why I like you guys... you're always good for a laugh.
Keep asking everybody out here for more advice on how to further
"hack" some additional radios... lol


That is the 4th LOL he's used today. And now he's starting separate theads, Talk
about starved for attenion. Brian, get a girlfriend, you nerd.

Vinnie S.

I thought griffey already had a boyfriend

On Sun, 6 Jan 2008 17:05:46 -0500, "radiosrfun"
wrote:

On Sun, 6 Jan 2008 10:04:22 -0800 (PST), Telstar Electronics
wrote:

On Jan 6, 11:01 am, "radiosrfun" wrote:
At least "I" have money coming in from my work. CBs is not my bread
winner.
I got away from them LONG ago.
I'm doing these as a favor.
His golden screw driver is buried so deep in his ass - his mind is
warped.
Thats why "he" dreams as he does.

That's why I like you guys... you're always good for a laugh.
Keep asking everybody out here for more advice on how to further
"hack" some additional radios... lol

Hey - Jack off - you've made it very apparent - YOU CAN'T READ. "I" am not
"hacking" them, I'm repairing those which "were" hacked. Get a ****ing
clue - ASS HOLE.

You're so ****ing stupid - the only thing you know how to do - is SPAM this
group and put others down. And you call yourself a "business man" wanting
Customers? WRONG......... You're not a "businessman" - you're a blatant ASS
HOLE trying to hawk your ****ing garbage.

Again - GO **** YOURSELF. ****ing pathetic loser.


Wow someone said the exact same thing to brian griffey about 12 years
ago right on this group. Some things never change for sniffey griffey.

Again - GO **** YOURSELF. ****ing pathetic loser.


Wow someone said the exact same thing to brian griffey about 12 years
ago right on this group. Some things never change for sniffey griffey.

That's pretty sad, isn't it?

Vinnie S.

"Vinnie S." wrote in message
...

Again - GO **** YOURSELF. ****ing pathetic loser.


Wow someone said the exact same thing to brian griffey about 12 years
ago right on this group. Some things never change for sniffey griffey.

That's pretty sad, isn't it?

Vinnie S.

And to think, 12 years ago - "I" never knew of Brian Griffey. Must have
pegged him right - from the get go.
DAMNED!

I suppose - once an ass hole - always an ass hole. Some things never change.