Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Alan Lansburger wrote in message ...
Can it be fitted to a specific channel or does it takes all the channels once it is installed? It is fitted in the audio circuits and has nothing to do with channel, so will work on all channels. Although, it can be switchable, so you can use it when you want or switch it off at any time, on any channel. Think of it as a squelch. The difference is that a standard squelch will open up when a signal is strong enough, but the CTCSS will only open up if they are sending the correct sound. Also, it needs no adjustment - it is either on or off. Regards, Peter. |
#2
![]() |
|||
|
|||
![]()
can anyone else hear you when you reply to someone else that has a ctcss
tone, or just the people who have the tone installed in the radio can hear each other, sort of like encrypted type comms? "Brainbuster" wrote in message news:3f28b75a.0@entanet... Alan Lansburger wrote in message ... Can it be fitted to a specific channel or does it takes all the channels once it is installed? It is fitted in the audio circuits and has nothing to do with channel, so will work on all channels. Although, it can be switchable, so you can use it when you want or switch it off at any time, on any channel. Think of it as a squelch. The difference is that a standard squelch will open up when a signal is strong enough, but the CTCSS will only open up if they are sending the correct sound. Also, it needs no adjustment - it is either on or off. Regards, Peter. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Quindar Tones (NASA roger beep) | Homebrew | |||
would like advice on idea for class E SSB Exciter | Homebrew | |||
NF Frequency Response of Dataradio RNet-JSLM | Equipment | |||
NF Frequency Response of Dataradio RNet-JSLM | Equipment |