The variable pot on the 667, what size is it? I put a 1 megohm in it but dont
seem to to doing right. Thanks for your help

"Reg1647" wrote in message
...
The variable pot on the 667, what size is it? I put a 1 megohm in it but
dont
seem to to doing right. Thanks for your help

the pot used on a 350hdv is a 250ohm 2 watt I don't have a 667 schematic.
but knowing how they build their linears they design there equipment to
utilize the same switches and so forth for convenience and cost
considerations. The pot on a 667 is used to control the driver pill, so it
goes to stand that it most probably is the same size. The following links
have the 350 schematic
http://www.texasstar.com/350HDVschematic.gif
http://www.geocities.com/linearschem...texasstar.html
--
visit http://www.geocities.com/linearschematics/

cbtricks.com says
100ohm 1W POT


http://www.cbtricks.com/Amp/txstar/6...667V_parts.htm

Thanks for your help. I noticed the 350v and the 500v uses 250 ohm 1 watt, the
667 100 ohm 1 watt, Seems like it would use the same as the 350 & 500 but i'm
not a tech. Regards, Reggie

"Dr. Death" wrote:
"Reg1647" wrote in message
...
The variable pot on the 667, what size is it? I put a 1 megohm in it
but
dont
seem to to doing right. Thanks for your help

the pot used on a 350hdv is a 250ohm 2 watt I don't have a 667 schemati
c.
but knowing how they build their linears they design there equipment to

utilize the same switches and so forth for convenience and cost
considerations. The pot on a 667 is used to control the driver pill, so

it
goes to stand that it most probably is the same size. The following lin
ks
have the 350 schematic
http://www.texasstar.com/350HDVschematic.gif
http://www.geocities.com/linearschem...texasstar.html
--
visit http://www.geocities.com/linearschematics/


Hey you know linears are illegal on CB













=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Article poste via Voila News - http://www.news.voila.fr
Le : Tue Jan 6 17:51:09 2004 depuis l'IP : acd03499.ipt.aol.com [VIP 532284301978]

On 6 Jan 2004 16:51:09 GMT, Robert The Bruce
wrote:

"Dr. Death" wrote:
"Reg1647" wrote in message
...
The variable pot on the 667, what size is it? I put a 1 megohm in it
but
dont
seem to to doing right. Thanks for your help

the pot used on a 350hdv is a 250ohm 2 watt I don't have a 667 schemati
c.
but knowing how they build their linears they design there equipment to

utilize the same switches and so forth for convenience and cost
considerations. The pot on a 667 is used to control the driver pill, so

it
goes to stand that it most probably is the same size. The following lin
ks
have the 350 schematic
http://www.texasstar.com/350HDVschematic.gif
http://www.geocities.com/linearschem...texasstar.html
--
visit http://www.geocities.com/linearschematics/


Hey you know linears are illegal on CB



Did he say he was going to use it on CB?

Where is your paypal info?

Robert The Bruce wrote:
"Dr. Death" wrote:
"Reg1647" wrote in message
...
The variable pot on the 667, what size is it? I put a 1 megohm in it
but
dont
seem to to doing right. Thanks for your help

the pot used on a 350hdv is a 250ohm 2 watt I don't have a 667 schemati
c.
but knowing how they build their linears they design there equipment to

utilize the same switches and so forth for convenience and cost
considerations. The pot on a 667 is used to control the driver pill, so

it
goes to stand that it most probably is the same size. The following lin
ks
have the 350 schematic
http://www.texasstar.com/350HDVschematic.gif
http://www.geocities.com/linearschem...texasstar.html
--
visit http://www.geocities.com/linearschematics/

Hey you know linears are illegal on CB

So is jaywalking or spitting on the sidewalk. don't get caught.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Article poste via Voila News - http://www.news.voila.fr
Le : Tue Jan 6 17:51:09 2004 depuis l'IP : acd03499.ipt.aol.com [VIP
532284301978]

From: (Robert=A0The=A0Bruce)
"Dr. Death" wrote:
"Reg1647" wrote in message
...
The variable pot on the 667, what size is it? I put a 1 megohm in it but
dont
seem to to doing right. Thanks for your help
the pot used on a 350hdv is a 250ohm 2 watt I don't have a 667 schemati
c. but knowing how they build their linears they design there equipment
to
utilize the same switches and so forth for convenience and cost
considerations. The pot on a 667 is used to control the driver pill, so
it
goes to stand that it most probably is the same size. The following lin
ks have the 350 schematic
http://www.texasstar.com/350HDVschematic.gif
http://www.geocities.com/linearschem...texasstar.html
--
visit http://www.geocities.com/linearschematics/ _
Hey you know linears are illegal on CB

Article poste via Voila News - http://www.news.voila.



_
So is providing the FCC a contact address other than your primary
domecile.

"Robert The Bruce" wrote in message
...
"Dr. Death" wrote:
"Reg1647" wrote in message
...
The variable pot on the 667, what size is it? I put a 1 megohm in it
but
dont
seem to to doing right. Thanks for your help

the pot used on a 350hdv is a 250ohm 2 watt I don't have a 667 schemati
c.
but knowing how they build their linears they design there equipment to

utilize the same switches and so forth for convenience and cost
considerations. The pot on a 667 is used to control the driver pill, so

it
goes to stand that it most probably is the same size. The following lin
ks
have the 350 schematic
http://www.texasstar.com/350HDVschematic.gif
http://www.geocities.com/linearschem...texasstar.html
--
visit http://www.geocities.com/linearschematics/


Hey you know linears are illegal on CB

What does that matter to you George, you've promoted
illegal cb for years. Now talk about a hypocrite.

Landshark

A quote from George:

"David, I can only assume you are talking about THE BASE VERSION, it RUNS 21
VOLTS TO THE PILLS WHEN IT IS IDLE, WHEN YOU KEY UP THE VOLTAGE WILL DROP
PROBABLY TO 16 VOLTS OR SO, the pills aren't seeing 21 volts. That IS
CALLED AN UNREGULATED POWER SUPPLY Now I don't agree with the builder of X
Force regarding regulating, but because he is not a technician by any
stretch of the means I know he doesn't understand the correct operation of
the amps he is building. he is just a parts assembler. But It is cheaper to
build an amp with a UN regulated power supply"



--
Real heroes are men who fall and fail
and are flawed, but win out in the end
because they've stayed true to their
ideals and beliefs and commitments.

Lancer wrote:
On 6 Jan 2004 16:51:09 GMT, Robert The Bruce
wrote:

"Dr. Death" wrote:
"Reg1647" wrote in message
...
The variable pot on the 667, what size is it? I put a 1 megohm in i
t

but
dont
seem to to doing right. Thanks for your help

the pot used on a 350hdv is a 250ohm 2 watt I don't have a 667 schema
ti
c.
but knowing how they build their linears they design there equipment
to

utilize the same switches and so forth for convenience and cost
considerations. The pot on a 667 is used to control the driver pill,
so

it
goes to stand that it most probably is the same size. The following l
in
ks
have the 350 schematic
http://www.texasstar.com/350HDVschematic.gif
http://www.geocities.com/linearschem...texasstar.html
--
visit http://www.geocities.com/linearschematics/


Hey you know linears are illegal on CB



Did he say he was going to use it on CB?

No he didn't. Did I say I was wa3moj? No I didn't.

Where is your paypal info?

It will be posted later, how much are you
going to pay?












=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Article poste via Voila News - http://www.news.voila.fr
Le : Tue Jan 6 18:11:55 2004 depuis l'IP : acd03499.ipt.aol.com [VIP 532284301978]