On Fri, 13 Aug 2004 15:29:17 -0500, "Dave VanHorn"
wrote in :


"Southern Kiwi" wrote in message
...
Can I use my old coax and mounts from my 26 mhz days on a new uhf rig?

Probably, but how much of your signal do you want to waste, heating up the
coax?
With some types, it wouldn't be a surprise to see 3/4 of your power lost
between the rig and the antenna.. Andrews LMR-400 is good, as is all large
hardline.


If the line is short, the type won't make much difference unless it's
RG-174 (really thin stuff). E.g, for a length of 18' @ 500 MHz I got
the following loss figures:

1/2" HL -- 0.3 dB
RG-17 -- 0.3
9913 -- 0.5
RG-8 -- 0.9
RG-58 -- 1.5
RG-174 -- 4.9


N connectors are much better than the old "UHF" connectors (so
named when 30 MHz was "Ultra-high frequency")


I don't know where you get your information but it's wrong. UHF
connectors work fine for UHF. And to the best of my knowledge, the
current limits of the UHF spectrum (300 MHz to 3 GHz) were defined
long before the connectors ever existed.






-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----