Don't forget to check for good connections on the power side... A bad
ground, or a weak + will do that too, in certain inexpensive radios...

-SSB

Chad Wahls wrote:

"R. Scott" wrote in message
...

Do you hear anything on your end? Might just be the mike button
squeaking a
little bit and being picked up by the mike, as the radio probably
switches
to transmit just before the button is fully depressed...

Just an idea...

PH

Not a thing on my end, everythign sounds perfect. They just said it was
chirping at first now its a short loud squeal for 1/2 second. Then
everything
is fine.

--
Rick
Everett, Washington
Remove THREAD to reply.


If you are running a cheapo amp it's a common problem. Usually stems from
an impedance mismatch causing resonation in the feedline/antenna. They are
actually hearing a harmonic of the resonation.

If it's a bone stock rig check your line and antenna for damage and SWR.
Won't hurt to know your ERP either. If all is well the radio's output
section may need tuned. Has it been screwdrivewr modded? Or peaked?


Chad