Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Andy (2LD751) recently posted a question regarding remote cb's.
Cobra made a model many years ago called the 67LTD. Box mounts under the seat and everything is in the handheld unit. Only problem is sometimes the wiring gets brittle and the unit becomes useless. I have 2 working units and had 2 dead ones. Sharp also made 2 similar type units. Sharps model had a detachable handheld unit. One of them came with a switchable ANL in the handheld and a signal strength meter on the speaker part. The other sharp came w/o the meter & ANL. Its very hard to find a competent cb shop that can work on the remote CB' s. James |
#2
![]() |
|||
|
|||
![]() "James Gross" wrote in message om... Andy (2LD751) recently posted a question regarding remote cb's. Cobra made a model many years ago called the 67LTD. Box mounts under the seat and everything is in the handheld unit. Only problem is sometimes the wiring gets brittle and the unit becomes useless. I have 2 working units and had 2 dead ones. Sharp also made 2 similar type units. Sharps model had a detachable handheld unit. One of them came with a switchable ANL in the handheld and a signal strength meter on the speaker part. The other sharp came w/o the meter & ANL. Its very hard to find a competent cb shop that can work on the remote CB' s. James Cobra's newer one is the 75WXST Had one, it did not suck that bad. Chad |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Kenwood TM-V7A crossband repeat and remote control? | Equipment | |||
WTB: TS-520S REMOTE Plug Not ext. VFO Plug | Boatanchors | |||
Remote antenna switching | Antenna | |||
Any remote head/remote mount CB's? | CB | |||
Remote Cutoff Pentodes in Regens | Homebrew |