"Dave Hall" wrote in message
news
On Wed, 19 Jan 2005 09:52:04 -0500, Vinnie S.
wrote:

Could not find them using the C2R prefix but there is a bunch. That
board
is used in a bunch of radios and has a PLL that does not like to be
modded,
I think that made the FCC happy. Iroic that there IS spots on the board
for
another final and support components, a simple call to Galaxy and you can
have a dual final radio in less than an hour. OOPS!!!!!

Correct. This was rather pricey. I think upwards of $60, but not sure. It
was
almost more economical to get a small amp.

In cases like this, it's almost always better to get a small amp over
modifying a radio beyond its limits..

Dave
"Sandbagger"
http://home.ptd.net/~n3cvj

It's not really beyond the DX2547's limits. There's an ample power supply
in there and the board is already punched, labled and wired for another
final, just needs support components and biased up.

But as stated earlier the gain in power is not really worth the hasle, and
not enough to drive a high drive amp.

More of a bragging right I guess.

Btw, for the technician it is a wonderful radio to work on. The top and
bottom comes off like most mobiles and it's wide enough to sit on it's side
and work on both sides. Only have to clip 2 nylon ties holding the speaker
cable in. There's plenty of room and the super razor sharp edges are kept
to a minimum. I was pleasantly suprised when working on it, the manual is
also very easy to understand and comprehensive.

Chad