Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old February 11th 05, 10:00 PM
Vinnie S.
 
Posts: n/a
Default Ham test question

1. Is it a requirement to have passed the tech test, before taking the general?
Or can you just take the general?

2. Can you take the morse after the written (weeks)?

Vinnie S.
  #2   Report Post  
Old February 11th 05, 11:05 PM
No I Am Not Him
 
Posts: n/a
Default

Vinnie S. wrote:
1. Is it a requirement to have passed the tech test, before taking

the general?
Or can you just take the general?

2. Can you take the morse after the written (weeks)?

Vinnie S.


Why worry about rules? After all, it's just like going 56 in a 55 mph
zone.

  #3   Report Post  
Old February 12th 05, 02:06 AM
K7MEM
 
Posts: n/a
Default

Vinnie S. wrote:
1. Is it a requirement to have passed the tech test, before taking the general?
Or can you just take the general?

2. Can you take the morse after the written (weeks)?

Vinnie S.


Each license class is considered a different level and it is required
that you pass the previous level before you can use the privileges
of the next. But, as you asked, you can take any of the tests separately,
on different days or weeks apart. However, if you take and pass the
general test, and can not provide proof that you took the tech test
and the code test, you will not be granted the privileges of that level.

When you go to the testing station, you can take as many test as you
want for a single fee. For me it was $6.45. If you split it up, you
will be paying that same fee for each test. None of the tests are that
big of a deal. A month or two of studying the Qs and As and you should be
able to pass them all in one sitting. Go for the gold and go for the
extra test too. The big stumbling block was the 13 and 20 WPM
code tests, but they are all gone now.

For more information try "http://www.arrl.org/FandES/ead/classes.html".
All of the possible Qs and As are available there, as well.

--
Martin E. Meserve - K7MEM
http://www.k7mem.150m.com
  #4   Report Post  
Old February 12th 05, 02:27 AM
Vinnie S.
 
Posts: n/a
Default

On Fri, 11 Feb 2005 19:06:35 -0700, K7MEM wrote:

Vinnie S. wrote:
1. Is it a requirement to have passed the tech test, before taking the general?
Or can you just take the general?

2. Can you take the morse after the written (weeks)?

Vinnie S.


Each license class is considered a different level and it is required
that you pass the previous level before you can use the privileges
of the next.


Excellent. At least I got that straight.

But, as you asked, you can take any of the tests separately,
on different days or weeks apart. However, if you take and pass the
general test, and can not provide proof that you took the tech test
and the code test, you will not be granted the privileges of that level.


When you go to the testing station, you can take as many test as you
want for a single fee. For me it was $6.45. If you split it up, you
will be paying that same fee for each test. None of the tests are that
big of a deal. A month or two of studying the Qs and As and you should be
able to pass them all in one sitting.


Are the questions from the ARRL pool the only questions I will ever see?

Go for the gold and go for the
extra test too. The big stumbling block was the 13 and 20 WPM
code tests, but they are all gone now.


I just want to get to the general level for now. I want to learn the code, is it
5 wpm only know? I thought you needed 13 wpm for general? I have no desire to
use code, but will do so for the test. The only thing is that by the time I can
save up enough for a $1,500 HF all band tranceiver, code will be gone anyway. I
hope to have one by the next skip cycle in a few years.

Vinnie S.
  #5   Report Post  
Old February 12th 05, 02:57 AM
Caveat Lector
 
Posts: n/a
Default

For the straight word on ham licensing and requirements -- see URL;
http://www.arrl.org/FandES/ead/classes.html
General and Extra currently require a 5 wpm code test.

Once licensed to General or Extra, a used $350 HF transceiver will get you
on the air (100+ Watts) and if you make your own antenna -- add $3 or $4.

If and when the code requirement is deleted, the use of Morse code will
continue - as it is just another mode of operation, many will continue to
use it and newbies will find the advantages of it, so MORSE WILL live on.

The lower bands -- 160M, 80M, and 40M are not dependent on the "skip cycle".
30m will do well also in the off years but it is a CW and data mode only.

Caveat Lector (Reader Beware) - A Ham
Help The New Hams
Someone Helped You
Or did You Forget That ?



Someone wrote
I just want to get to the general level for now. I want to learn the code,
is it
5 wpm only know? I thought you needed 13 wpm for general? I have no desire
to
use code, but will do so for the test. The only thing is that by the time
I can
save up enough for a $1,500 HF all band tranceiver, code will be gone
anyway. I
hope to have one by the next skip cycle in a few years.

Vinnie S.





  #6   Report Post  
Old February 12th 05, 03:18 AM
Vinnie S.
 
Posts: n/a
Default

On Fri, 11 Feb 2005 18:57:35 -0800, "Caveat Lector" wrote:

For the straight word on ham licensing and requirements -- see URL;
http://www.arrl.org/FandES/ead/classes.html
General and Extra currently require a 5 wpm code test.

Once licensed to General or Extra, a used $350 HF transceiver will get you
on the air (100+ Watts) and if you make your own antenna -- add $3 or $4.


Any specific model?

If and when the code requirement is deleted, the use of Morse code will
continue - as it is just another mode of operation, many will continue to
use it and newbies will find the advantages of it, so MORSE WILL live on.


I am not saying they should get rid of it. I am just saying I won't use it.
Sounds like they will get rid of the test in 2006 or so. I don't want to wait.
So I will study.

The lower bands -- 160M, 80M, and 40M are not dependent on the "skip cycle".
30m will do well also in the off years but it is a CW and data mode only.

Caveat Lector (Reader Beware) - A Ham
Help The New Hams
Someone Helped You
Or did You Forget That ?



Thanks !!!!

Vinnie S.
  #7   Report Post  
Old February 12th 05, 01:59 PM
Caveat Lector
 
Posts: n/a
Default


"Vinnie S." wrote in message
...
On Fri, 11 Feb 2005 18:57:35 -0800, "Caveat Lector"
wrote:

For the straight word on ham licensing and requirements -- see URL;
http://www.arrl.org/FandES/ead/classes.html
General and Extra currently require a 5 wpm code test.

Once licensed to General or Extra, a used $350 HF transceiver will get you
on the air (100+ Watts) and if you make your own antenna -- add $3 or $4.


Any specific model?


Take a look at these -- Kenwood TS-520, Yaseu FT-101 series, Heathkit
HW-101, Swan 350
Lots more but these are very popular.
These are all Ham Bands only and have some vacuum tubes
A winner for a few dollars more is the Kenwood TS-830S.

If and when the code requirement is deleted, the use of Morse code will
continue - as it is just another mode of operation, many will continue to
use it and newbies will find the advantages of it, so MORSE WILL live on.


I am not saying they should get rid of it. I am just saying I won't use
it.
Sounds like they will get rid of the test in 2006 or so. I don't want to
wait.
So I will study.


The average person needs about 30 hours of study and practice on the code to
hit 5 wpm.
Morse code practice at URL:
http://www.aa9pw.com/radio/morse.html

The lower bands -- 160M, 80M, and 40M are not dependent on the "skip
cycle".
30m will do well also in the off years but it is a CW and data mode only.

Caveat Lector (Reader Beware) - A Ham
Help The New Hams
Someone Helped You
Or did You Forget That ?



Thanks !!!!

Vinnie S.



  #8   Report Post  
Old February 12th 05, 04:39 AM
Leland C. Scott
 
Posts: n/a
Default


"Caveat Lector" wrote in message
news:zgePd.30562$xt.15155@fed1read07...
30m will do well also in the off years but it is a CW and data mode only.


You're also limited to 200 watts max on that band too, regardless of license
class or mode.
--
Leland C. Scott
KC8LDO

Wireless Network
Mobile computing
on the go brought
to you by Micro$oft


  #9   Report Post  
Old February 12th 05, 02:05 PM
Caveat Lector
 
Posts: n/a
Default





"Leland C. Scott" wrote in message
...

"Caveat Lector" wrote in message
news:zgePd.30562$xt.15155@fed1read07...
30m will do well also in the off years but it is a CW and data mode only.


You're also limited to 200 watts max on that band too, regardless of
license
class or mode.
--
Leland C. Scott
KC8LDO

That is true although you can work all over the world on 30M with 5 watts of
power on that band. Have done it and have DXCC-QRP -- 5Watts

--
Caveat Lector (Reader Beware)
Help The New Hams
Someone Helped You
Or did You Forget That ?


  #10   Report Post  
Old March 15th 05, 12:59 PM
Steveo
 
Posts: n/a
Default

"Leland C. Scott" wrote:
"Caveat Lector" wrote in message
news:zgePd.30562$xt.15155@fed1read07...
30m will do well also in the off years but it is a CW and data mode
only.


You're also limited to 200 watts max on that band too, regardless of
license class or mode.

Is that what you run there Lee?


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FCC Morse testing at 16 and 20 WPM Avery Hightower Policy 196 July 30th 04 01:25 AM
DX test Results [email protected] Shortwave 0 April 16th 04 03:52 PM
DX test Results [email protected] Shortwave 0 April 3rd 04 04:32 PM
DX test Results [email protected] Shortwave 0 March 19th 04 04:28 PM
WXHL DX test - update! [email protected] Shortwave 1 February 24th 04 12:57 AM


All times are GMT +1. The time now is 10:54 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017