LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10   Report Post  
Old December 24th 05, 12:30 AM posted to rec.radio.cb
Scott in Baltimore
 
Posts: n/a
Default questions about building CB antenna...

I don't think so, only because I have seen flat ground planes. My Starduster
were at a sharp angle. Maybe Scott can knows better. I would think the flat or
GP at 90 degrees to the center conductor is fine.


Straight radials would create a 30 ohm antenna.
45 degree droops create about 50 ohms.

There shouldn't be any current flowing down the outside of the
shield with a groundplane, so you won't need a balun,
unlike a dipole that requires equal and opposite phases.
If you try to feed a dipole with coax, the outer shield
becomes part of the antenna system, causing high SWR readings,
(even if the SWR is low), RF interference and degraded performance.


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
On Topic [email protected] Shortwave 5 November 2nd 05 10:35 AM
ABOUT - Making a SWL Antenna out of 300 Ohm Twin Lead and TV Coax Cable RHF Shortwave 0 October 28th 05 12:22 PM
Antenna Advice Chris Shortwave 5 September 20th 04 02:04 AM
The main problem with Ham radio... Observer Policy 59 February 1st 04 07:43 PM
Outdoor Antenna and lack of intermod Soliloquy Scanner 11 October 11th 03 01:36 AM


All times are GMT +1. The time now is 01:03 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017