LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old July 26th 06, 11:55 PM posted to rec.radio.cb
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 28
Default Electric Motor Noises. GAHH!!

It won't make any difference unless that ground (from the car chassis
to the radio) is very short.... just a few inches. Bolt the radio's
mounting bracket directly to metal (or as close to it as possible),
then run a SHORT ground wire to the metal.


This new radio I got, the Cobre 75, had a little matchbox that the
radio plugs into (it has the power and the antenna cable coming into
it, rest of radio is in a big microphone. I tried shoving that around
on various grounded UNPAINTED parts of my vehicle, and no difference.

I'm wondering how close a capacitor has to be to the fuel pump to
actually have an effect. I'm going to try putting a noise filter inline
at the fuse block, and if that doesn't work, deeply ponder whether I
want to work under the truck on my gravel driveway .

I was just joking. But the power line is just the line going to the
house? I was under the impression that you were sitting under a major
distribution line or something. If the noise is coming from your house
power line you should be able to find out the source of the noise by
shutting off things in the house. A computer UPS or security backup
supply can cause gobs of noise, as can light dimmers and other small
appliances.


That's a good idea, I didn't think about the noise coming from devices
IN my house. I have quiet a few noisy flourescent lights that interfere
with my shortwave radio. Cursed cheap ballasts.

It would be better if you could run the coax -up- the hill and mount
the antenna as high as possible.


I wish I could. Uphill is the road and my neighbors. Luckily, in
Oregon, we have huge trees. I'll say it's a christmas ornament.



You're in beaverland? I'm just over here in Spokane. Are you on the
wet or dry side of the state?


Yeah, Actually Beaverton. Wet side. I'm on the other side of the hill,
a few miles from downtown Portland. I'm smack dab in the middle of all
of the interestates and major highways in Oregon (at least within 5
miles). The 5, 405, 26, 84/30, 217. I wish I could reliably hear
traffic on the 5!!

My little portable shortwave radio is easier to understand than my CB
radio is on the same signals

Maybe I'll just duct tape that to my dashboard . Kicks major arse
with the 100 foot longwire.

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Electromagnetic Radiation N9OGL General 31 March 1st 06 02:42 PM
Electromagnetic Radiation N9OGL Policy 32 March 1st 06 02:42 PM
Electric Lines and Gas Pipes To Carry Internet To Princeton Illinois policy-ham General 12 November 28th 05 06:17 PM
FCC: Broadband Power Line Systems Paul Policy 0 January 10th 05 05:41 PM
Do you recognize yourself ? Stef Antenna 3 January 5th 04 06:16 PM


All times are GMT +1. The time now is 06:00 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017