Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
looking for the best rig controller/digital interface for running
psk31, amtor, rtty, etc. opinion? costs? using a computer with USB ports... thanks |
#2
![]() |
|||
|
|||
![]()
On 8 Oct 2006 08:21:33 -0700, "wf3h" wrote:
looking for the best rig controller/digital interface for running psk31, amtor, rtty, etc. opinion? costs? using a computer with USB ports... thanks A cheap interface for your soundcard/rig combo and software for the mode you want. Find one prebuilt, a kit or roll your own. 73, Jim |
#3
![]() |
|||
|
|||
![]()
wf3h wrote:
looking for the best rig controller/digital interface for running psk31, amtor, rtty, etc. opinion? costs? using a computer with USB As someone else said, they're pretty easy to make, but you can also get them assembled and wired for your own radio from "BuxComm," run by Buck, K4ABT. I bought one from BuxComm a few years ago and saved the bother of getting all the parts, etc. www.PacketRadio.com or www.COMMparts.com/catalog. Cheap and easy, many (?all?) of them come with software on a CD, so you can basically spend an hour hooking up and installing, and be working a digital mode the same afternoon. I know Buck is still in business because I was using one of his interfaces between my PC and FT-840 to work PSK31 and RTTY; then I went inactive for a few years and sold the FT-840. Decided to play on HF again, dragged out the 706, and instead of buying connectors and making a cable, I just ordered a cable from BuxComm, pre-wired, to go between the sound card and 706. Didn't cost much more than the two connectors would have cost at Radio Shack. :-) Good luck! The digital modes--particuarly PSK31 IMO--can be a WORLD of fun! _______________________________________________ Ken Kuzenski AC4RD ken . kuzenski at duke .edu _______________________________________________ All disclaimers apply, see? www.duke.edu/~kuzen001 |
#4
![]() |
|||
|
|||
![]() |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Controller for handheld scanner | Homebrew | |||
Here's Your Answer, Todd.... | Policy | |||
Schematic jpeg for Yaesu G-5500 Controller needed | Equipment | |||
Schematic jpeg for Yaesu G-5500 Controller needed | Equipment |