Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Dan, Steve,
S. Sampson wrote: If you don't use a specified code, you must identify using a specified code. For example, if you design your own protocol (unspecified code), then you should design the system to ID every 10 minutes, or every transmission. That should not be a problem. I envisage we would use an unspecified code for our data transmissions, but we could self-identify with an RTTY broadcast every 10 min. This will all be computer-controlled so that should be easy. Yes. Phil Karn proposed a DES authentication many years ago, however, I don't see why just a plain old MD5 checksum of the data and the time-stamp wouldn't fit most requirements. Our motivation for authentication is that we are concerned with controlling access to the sensor network; for instance, we want to be the only ones who can give commands to the sensor nodes, like "turn off." I don't see a problem in what you are proposing, and I think you could enlist several amateurs who wanted to help. It goes without saying, that you would need a ham license yourself, but that is pretty simple these days on a no-code ticket. I should have mentioned, I have a NCT license: KD5SZT. Issued last summer. That's a great idea, getting hams involved. I think it would be a fun project. Even if the money you use to buy the equipment, and power the equipment, is grant money, it would be legal. Where you would begin to have problems, is if you made the data proprietary, or sold subscriptions/membership/access to say web sites where the data is stored. You could maintain a compilation type copyright, and restrict access to the raw data and software, if you provided say access to the processed data. I'm being vague, but the gist of it, is that you can't make money, and I never heard of a research program that did. Our goal is to provide a "service" to researchers; no compensation would ever be accepted and the network is only for use in relaying sensor data and sending commands to said sensors. Data produced would be freely available. Sounds like our application is OK with the use policies. Steve, thanks for your input! Dan/W4NTI wrote: Do you have, or are you going to have, a ham license? Will all the stations involved have a ham licensee on hand? If not you will run into difficulties with the third party rules. I do have a NCT license. I can imagine getting my advisor to get a license, but I'm interesting in seeing if I can get around that. As I see it, there would be several autonomous transmitters (relay devices) and one control station, all of which would be under my control. As I do sleep some of the time, is that a problem? What you describe may fall under 'experimental'. But I would check with the FCC. We want to design our system so that any manner of communication means could be used to ferry the sensor data (internet, etc). But for our initial experimentation, I think ham radio would be (a) very appropriate and affordable and (b) fun. We will probably use ISM for short-range communications and only rely on ham for longer range xmits. You may want to try Mr. Hollingsworth at FCC and see what he says. He is chief of enforcement, FCC. Or maybe he can direct you to the proper desk. Great, thanks for the reference. I will contact him. Regards, -- Leo Szumel | ECE Graduate Student, UC Davis | KD5SZT Email: |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
eBay Yaesu FR-101 - Dead bands - need help | Boatanchors | |||
Please send me your opinion about my project as placed on | Antenna | |||
Help with ARRL 1960 Handbook project | Boatanchors | |||
Portable QRP project for blind ham living in apartment. | Antenna | |||
Anyone have mid 1960s Spiegel catalogs? (radio history research project) | Boatanchors |